Olympus Camedia D560 Battery Compartment Cover Replacement

Tools

• iFixit Opening Tools (1)

Step 1 - Battery Compartment Cover

Image Description: Three images showing the initial steps of disassembling the camera. The first shows a hand holding the camera and using a tool to remove a screw. The second shows the inside of the camera with the back cover removed, revealing internal components and battery slots. The third shows a tool being used to pry open a part of the camera casing.

• Remove all five screws found on the outer shell of the camera. Three are along the bottom, and two are on the side closest to the LCD screen.
• Locate and remove three more screws under the USB port flap and one more under the memory card flap.
• Once all screws are removed, use an opening tool to carefully pry the back outer shell away from the rest of the camera.

Step 2

Image Description: Three images illustrating the separation of the back cover and the removal of the front cover. The first shows the back cover being detached. The second shows the camera with the back cover removed, highlighting screw locations for the front cover. The third shows the front cover being carefully pried away, with wires still attached.

• Completely separate the back cover from the rest of the camera. Set the back cover aside.
• Unscrew the four screws fastening the front outer cover to the camera.
• Use a spudger to carefully pry the front outer cover away from the camera, being gentle to avoid damaging the yellow and black wires connecting it to the camera body.

Step 3

Image Description: Three images detailing the disconnection of wires and the complete separation of the front outer cover. The first shows a hand carefully unplugging wires from the camera's inner casing. The second shows the internal components with wires disconnected. The third shows the front outer cover fully detached from the main camera body.

• Carefully unplug the yellow and black wires connecting the front outer cover to the rest of the camera by gently disconnecting the ends attached to the inner casing.
• The front outer cover should now be completely separated from the rest of the camera.

Step 4

Image Description: Three images showing the removal of the battery compartment cover. The first shows the camera body after the front cover has been removed. The second shows a close-up of the battery compartment area with screws visible. The third shows the battery compartment cover being lifted, with its hinge mechanism visible.

• Carefully set aside the front outer cover. Locate the two screws attaching the battery compartment cover to the rest of the camera.
• Unscrew these two screws. Note that once removed, the back hinge of the battery compartment cover will flip up.

Step 5

Image Description: Two images. The first shows the camera body with the battery compartment cover removed, and the detached cover lying next to it. The second shows a close-up of the removed battery compartment cover.

• Your battery compartment cover should now be completely removed and ready for repair or replacement.

To reassemble your device, follow these instructions in reverse order.