Thecoopidea BEANS PRO True Wireless Earbuds

Product Overview

1. True Wireless Earbuds

• A: Multi-Function Button + LED light
• B: Microphone ?
• C: Charging interface
• D: Ear Cap

2. Charging Case

• E: Micro USB input
• F: LED Light
• G: Magnetic Closure

Specifications

• Frequency Response: 20 - 20KHz
• Bluetooth Version: 5.0
• Bluetooth Range: 10m
• Recharge Earbuds: 6 Times
• Battery: 800mAh
• Input: 5V/1A (Micro), 5V/1A (Wireless)
• Case Dimensions: 65x40x30mm (L x W x H)
• Case Net Weight: 40g
• Earbuds Dimensions: 27x24x20mm (each) (L x W x H)
• Earbuds Net Weight: 5g
• Waterproof Rating: IPX7
• Stand by Time: 100hrs
• Playtime: Up to 5hrs (Up to 35hrs On-The-Go)
• Charging Time (Earbuds): 1hr
• Charging Time (Charging case): 2hrs (Micro) / 4hrs (Wireless)

Package Contents

• 1x Beans PRO True Wireless Earbuds (Pair)
• 1x Sport Eartips (Pairs)
• 1x Eartip S, M, L (Pairs)
• 1x Beans PRO Charging Case
• 1x Micro USB Cable

Charge and Activate

Charge your BEANS PRO before first time use.

First Time Use

Before using BEANS PRO, charge it for at least 1 hour.

1. Step 1: Remove the film cover on the charging interface of the earbuds.
2. Step 2: Put the Earbuds into the charging case.

Note: Only put a dry BEANS PRO into the charger.

Two Ways of Charging

1. Step 3: By Micro USB: Connect the charging case to your computer or a power supply via a micro USB cable. Plug into the micro USB port and charge the case.
2. By Wireless Charge: Place the Charging case on a wireless charging pad.

PerfectFit

Eartip Types:

• Normal Eartips (Sizes S, M, L)
• Sport Eartips

Usage Recommendations:

• Best for Sport: Put on sport eartips with normal eartips. This provides a more secure fit during physical activity.
• Best for music: Put on normal eartips. This ensures optimal comfort and sound quality for general listening.

Insert Earbuds

1. Step 1: Tilt and insert BEANS PRO firmly into your ear.
2. Step 2: Adjust the BEANS PRO by rotating it backwards to achieve a perfect fit.

Turning Earbuds On

• Power On: Pick up the earbuds from the charging case, or hold the Multi-Function Button (A) on both earbuds for 2 seconds. You will hear the voice prompt "Power On".
• Bluetooth Pairing:
• Pairing Mode: Pick up the earbuds from the charging case, or hold the Multi-Function Button (A) on both earbuds for 4 seconds (ensure earbuds are turned off outside the charging case). You will hear the voice prompt "Pairing".

Earbuds Pairing

• Left Earphone: Blue LED flashes 3 times, then alternates between Blue and White.
• Right Earphone: Blue LED flashes 5 times, then a White light flashes once every 8 seconds.

Earbuds Pairing Success

• Left Earphone: Blue LED flashes once every 6 seconds.
• Right Earphone: White LED flashes once every 6 seconds.

Voice prompts: "Connected", "Left Channel" on the left earbud, "Right Channel" on the right earbud.

Turning Earbuds Off

• Power Off: Place the earbuds back into the charging case (2), or hold the Multi-Function Button (1) on either earbud for 4 seconds. You will hear the voice prompt "Power Off".
• Auto Power Off: The earbuds will automatically power off after 10 minutes of inactivity.

Manual Pairing / Forget Pairing

1. Turn off the earphones.
2. Hold the Multi-Function Button (MFB) of both earphones for 10-15 seconds until an indication sound is heard.
3. Turn off the earphones and turn them on again.
4. The Left (L) and Right (R) earphones are now paired and will enter pairing mode with mobile devices.

Charging Earbuds

• Earphone Charging: White light is on.
• Earphone Fully Charged: White light is off.
• Charging Case Charging: White light flashes.
• Charging Case Fully Charged: White light is on.
• Earphone Charging in Charging Case: Charging case Blue light is on.
• Earphone Fully Charged in Charging Case: Charging case Blue light is off.

Call / Music Control

Controls are performed via the Multi-Function Button (MFB) on each earbud.

Legend: • TAP, — HOLD, ⏳ 2SCE (2 seconds)

Warning

• Always store the earbuds in the charging case and safely protected.
• Avoid storing the earbuds in hot or cold environments to prevent depletion of the battery capacity.
• Avoid storing the earbuds for extended periods of time without recharging them.
• If the earbuds or the charging case become dirty, it is recommended to clean them with a soft cloth that has been dampened with clean water.
• The OS version of mobile devices may affect the performance of Beans Pro. It is recommended to update the OS of your mobile device to the latest version before use.
• Beans Pro is waterproof (IPX7 rated), which withstands heavy sweat or rain, and can be rinsed with fresh water under the tap. Beans Pro is not designed to enjoy music while swimming. It is recommended that you do not submerge them in salt or chlorinated water, or clean and dry Beans Pro properly when it has been exposed to water and sweat.
• Swimming pools that are enriched with heavy chemicals can ultimately lead to damaging Beans Pro from the inside.
• Do not put the Beans Pro into the charging case while it's still wet or moist. Doing so can cause severe damage to the electronics or housing of Beans Pro. The BeansPro Charging case is not waterproof.
• Remove from power source once the product is fully charged. Extended periods of over-charging will decrease battery life.
• Store the product in a dry area. Keep away from fire, heat, moist, and erosive materials.
• Do not use rough chemicals such as soap or cleanser to scrub the product.
• Do not disassemble, damage, or expose the product to water or fire. Warranty will be voided by any misuse of the product.
• If the battery is expanded or emits smell, stop using the product immediately.

Support & Origin

Find answers at www.thecoopidea.com.

Inspirations from New Zealand. Designed in Hong Kong. Produced in China.

Copyright 2019 The Coop Idea Ltd.