CONSTRUCTION Time Lapse Bundle

Operating Camera

1. Step 1: Insert SD Card

   Insert the SD card into the designated slot. ?️

2. Step 2: Connect Power

   Connect the power adapter and cable to the camera. ?

3. Step 3: Turn On Camera

   Press the OFF/ON button to power on the camera. ?

4. Step 4: Insert Batteries

   Insert 4 AA batteries into the battery compartment. ????

5. Step 5: Start Recording

   Press the REC button to begin recording. ▶️

6. Step 6: Stop Recording

   Press the STOP button to end recording. ⏹️

Camera Housing Assembly

Follow these steps to assemble the waterproof camera housing:

1. Prepare the main camera housing components.
2. Assemble the housing by connecting the main parts.
3. Insert the camera into the assembled housing.
4. Close the housing securely.
5. Fasten the latch to ensure a watertight seal. ✔️
6. The waterproof housing is now ready for mounting.

Wall Mount Options

Choose the appropriate mounting method for your installation:

• Wood Mounting

  Secure the mount to a wooden surface using screws. ?

• Drywall Mounting

  Use screws and appropriate anchors for installation on drywall. ?

• Adhesive Mounting

  Apply the adhesive strip for temporary or surface mounting. ?

Resources and Support

For more detailed information and support:

• Access the Full Manual & Tutorials: brinno.com/support/support-center/TLC300

• Register Online to get extra warranty months: brinno.com/support/registration

• View FAQs: brinno.com/support/faq/tlc300

• Use the Time Lapse Calculator: brinno.com/support/time_setting_calculator

For direct assistance, contact customer service at: customerservice@brinno.com