NAVAC NX1 Nexus Digital Manifold Gauge

Step 1: Link NX1 with Temperature Probe

This section describes how to connect the NX1 Digital Manifold Gauge with wireless temperature probes (NST1 for low-side and NST2 for high-side).

Procedure:

1. To pair the low-side temperature probe (NST1): Press and hold the ENTER button and the [add] button on the NX1 simultaneously for 3 seconds.
2. To pair the high-side temperature probe (NST2): Press and hold the ENTER button and the [add] button on the NX1 simultaneously for 3 seconds.

The NX1 display will show indicators such as "T1 Sync" or "T2 Sync" during the pairing process. Upon successful connection, the display will confirm "NST1 Successfully Connected" or "NST2 Successfully Connected".

Step 2: Link NX1 with Vacuum Gauge

This section describes how to connect the NX1 Digital Manifold Gauge with the NMV1S Vacuum Gauge.

Procedure:

1. On the NX1, click the MODE button to switch to "Evacuation Mode".
2. Press and hold the ENTER button and the [add] button on the NX1 simultaneously for 3 seconds.

The NX1 display will show "Evacuation Sync" during the pairing process. Upon successful connection, the display will confirm "NMV1S Successfully Connected".

Step 3: Link NX1 with myNAVAC APP

This section guides users on connecting the NX1 to the myNAVAC mobile application.

Prerequisites: If using the NX1 with a vacuum gauge and temperature probes, ensure they are linked to the NX1 first, following Steps 1 and 2.

Mobile App Setup:

• Turn on your mobile device's Bluetooth.
• Download the "myNAVAC" app from your mobile device's app store. Search for "myNAVAC" on the Apple App Store or Google Play Store.
• Register and log in to your account to access all app features.

Connecting NX1 to the App:

1. Open the myNAVAC app and navigate to the "Device" page.
2. Tap the [add] button (typically in the lower right corner) to search for available Bluetooth devices.
3. Find your NX1 device (e.g., "NAVAC-NXT-F77A4A") in the list of detected devices.
4. Tap the [add] button in the upper right corner of the device entry to link the NX1 with the myNAVAC app.

Once connected, tap the NX1 icon on the app's dashboard to access the tool interface. From here, you can explore various functionalities including real-time pressure, temperature, and vacuum readings, as well as access Record, Device Description, and Test Reports.