LAUNCH CR3008 Plus Quick Start Guide
Components & Controls
The LAUNCH CR3008 Plus features the following components:
- 1/8. Selection Button: Used to scroll left/right through menu options in MENU mode. When linked to a vehicle, it scrolls through screen data to the previous/next page.
- 2. BACK Button: Returns to the previous menu.
- 3. I/M Button: Provides quick access to the I/M readiness function.
- 4. LCD Screen: Displays diagnostic information.
- 5. Diagnostic Cable: Connects the scanner to the vehicle's DLC port.
- 6. OK Button: Confirms a selection or action from a menu list.
- 7/9. Selection Button: Used to scroll down/up through menu and submenu options in MENU mode.
- 10. USB Port: Connects to a PC for device upgrades and data exchange.
Diagram showing the physical layout of the LAUNCH CR3008 Plus with numbered components.
Diagnose
This scanner is designed to work with all OBD II compliant vehicles with 11-14 volts.
- Turn the ignition off.
- Locate the vehicle's 16-pin Data Link Connector (DLC). The location may vary depending on the vehicle's design. Refer to the provided illustration for a typical DLC location.
- Plug the diagnostic cable into the vehicle's DLC port. The tool will power on automatically.
- Turn on the ignition. The engine can be off or running. The scanner is now ready for diagnostics.
Diagram showing the typical location of a vehicle's DLC port in the footwell area.
Diagram showing the diagnostic cable being plugged into the vehicle's DLC port.
*All information, illustrations, and specifications are based on the latest available information at the time of publication. LAUNCH reserves the right to make changes at any time without notice.
