Norauto Rechargeable Inflator

About This Product

Thank you for choosing the Norauto Rechargeable Inflator. This product is designed to the highest quality standards to ensure your complete satisfaction. Please read this user manual carefully before using the device and follow all warnings. If you lend the device to someone else, please also give them this manual. Keep the manual handy for future reference.

Intended Use

This inflator is designed to operate with 12 volts DC or with its rechargeable battery. It is intended for inflating bicycle tires, sports equipment, inflatable mattresses, and other inflatable items. This device is for private use only and is not suitable for professional use. The manufacturer is not liable for damages resulting from improper use or use not in accordance with the instructions in this manual.

Safety Instructions

WARNING! Please read the instruction manual accompanying this product carefully. Improper use of the device may result in material and/or personal damage.

• Do not operate the device with a damaged cord or plug, or after a malfunction, drop, or any damage to the device. Before each use, check that the device and its accessories are free from physical damage. If damaged, discard the device.
• Regularly check the cigarette lighter plug and the power cord for damage. The power cord is not replaceable. If the power cord is damaged, the device must be discarded.
• Do not inflate products beyond the manufacturer's recommendations.
• The inflator and its components must not get wet.
• Do not use the inflator in wet or damp locations.
• Use it only in well-ventilated areas.
• Keep the inflator away from flammable areas/liquids at all times.
• Do not leave the inflator unattended while it is running.
• After use, turn off the device.
• Always unplug the device when not in use.
• Never let children handle or use this inflator. Close supervision is necessary when this inflator is used near children.
• The inflator is not a toy. Keep it away from children and pets at all times.
• Do not use this inflator in extreme heat conditions.
• Do not use this product for purposes other than inflation. Doing so may cause injury.
• Avoid disassembling or modifying this inflator.
• If the inflator emits abnormal sounds or overheats, turn it off immediately and let it cool down for at least 30 minutes.
• When using the inflator, do not let it run for more than 10 minutes continuously. Let the inflator cool down for 10 minutes before reusing it.
• Inspect the inflator before each use. If any cracked, broken, or damaged parts are identified, they must be repaired by qualified technicians.
• Never expose the inflator to rain, frost, or temperatures above 40°C or below -30°C. When below 0°C, warm up the product by running it without a load to protect the control system from failure.
• Never use it on people or animals.
• Ensure the cord is not exposed to hot objects, oil, or sharp edges.
• Do not carry the inflator by the air hose or power cord, as this may damage it.
• For safety, use only accessories and parts indicated in the user manual or those recommended by the manufacturer.
• Use the inflator only with the supplied accessories.
• Warning! For vehicles, tire pressure must be absolutely checked with an approved pressure gauge. The inflator's pressure gauge, while of good quality, is not approved and therefore NOT SUITABLE FOR INFLATING AUTOMOTIVE VEHICLE TIRES.
• Do not connect it to a 24 V DC battery system.
• Do not use the inflator while it is charging!
• Warnings! The Type-C cable is only designed to recharge the battery! The 12-volt DC cigarette lighter socket is designed for inflation only! Do not mix the cables!
• The inflator contains a lithium battery. Do not open the casing to avoid damaging the battery or causing other hazards.
• Warnings! The inflator contains a non-replaceable battery. Used batteries must not be disposed of with household waste. The battery must be removed from the device before disposal. To remove the battery, bring the product to a designated disposal/collection site. For your safety, do not attempt to remove the battery yourself. Improper battery removal may damage the battery and the device, cause personal injury, and/or affect the safety of the device.
• In case of battery leakage, dispose of the device in accordance with regulations. If battery acid has leaked, avoid contact with skin, eyes, and mucous membranes. Rinse affected areas immediately after contact with acid and wash with plenty of clean water. Consult a doctor.

Part Identification

• 1. Work light
• 2. LCD screen
• 3. Type-C charging port
• 4. Light button
• 5. Power switch
• 6. Pressure setting
• 7. Compressor unit selector
• 8. Valve cap storage
• 9. On/Off switch
• 10. Handle
• 11. Cigarette lighter socket
• 12. Air hose
• 13. Bag

Accessory Usage Reference

Various inflation ranges are provided for different items:

• 0.34-0.90 BAR (5-13 PSI)
• 1.60-3.20 BAR (23-46 PSI)
• 6.20-6.90 BAR (90-100 PSI)

Inflation Function

1. Connect the 12V power cord to the 12V DC power socket. Alternatively, if the inflator is charged, use the rechargeable battery.
2. Screw the air hose onto the tire's air valve by turning it clockwise until it is securely attached.
3. Press the pressure unit button to select PSI, BAR, or KG/CM².
4. Press the +/- button to set the desired pressure. Press the switch to start inflation. The inflator will automatically stop when the preset pressure is reached.
5. Remove the quick connector from the tire and screw on the valve cap.

Note: The default display is set to 2.5 BAR.