Crown CT28010XS-4 Cordless Rotary Hammer

Introduction

This document provides comprehensive instructions for the safe and effective operation of the Crown CT28010XS-4 Cordless Rotary Hammer. It includes essential safety warnings, detailed operating procedures, and maintenance guidelines to ensure optimal performance and longevity of the power tool.

The Crown CT28010XS-4 is designed for various drilling and chiseling applications. Please read this manual carefully before use to understand all features and safety precautions.

Key Features & Specifications

• Model: CT28010XS-4
• Power Tool Type: Cordless Rotary Hammer
• Chuck Type: SDS PLUS
• Battery Type: Li-ion
• Drilling Output: Concrete (18mm), Steel (12mm), Wood (25mm)
• Weight: 2.76 kg (6.09 lb)

Safety Information

General Safety Rules: Always wear appropriate personal protective equipment, including eye protection and hearing protection. Ensure the work area is clean and well-lit. Keep children and bystanders at a safe distance. Never force the tool; use the correct tool for the job. Regularly inspect the tool for any damage or misalignment.

Electrical Safety: While this is a cordless tool, always ensure chargers and any associated power cords are in good condition and used appropriately. Protect battery chargers from moisture.

Battery Safety: Handle battery packs with care. Avoid short-circuiting terminals. Do not expose batteries to extreme heat or fire. Recharge only with the specified charger.

Operation and Care

Familiarize yourself with all controls and functions before operation. Ensure the battery is correctly inserted and the switch is in the 'off' position before starting. For detailed instructions on changing accessories, drilling, and chiseling modes, refer to the relevant sections within this manual.

Proper maintenance is crucial. Keep the tool clean and store it in a dry, secure place. Sharpen and clean cutting accessories regularly for best results.

Service and Support

For any issues or repairs, it is recommended to have the power tool serviced by a qualified repair person using only identical replacement parts to maintain the tool's safety and performance. Refer to the manual for specific service instructions.