SINOX SWB7144 Installation Instruction
Included Components
- (A) M5x50 Lag Bolts: 2 pieces
- (B) M8x40 Concrete wall anchors: 2 pieces
- (C) Soft pads: 4 pieces
- (D) M6x12 screws: 2 pieces
- (E) M6 nuts: 2 pieces
- (F) M5/M6 washers: 2 pieces
- (G) M8x12 screws: 2 pieces
- (H) 5mm Plastic Sleeves: 4 pieces
- (I) M8 nuts: 2 pieces
- (J) Allen Key / Wrench: 1 piece
For Solid Brick and Concrete Mounting
Step 1: Wall Mounting
Mark the desired mounting location on the wall. Drill holes of approximately 8mm diameter and 50mm depth. Insert the concrete wall anchors (B) into the drilled holes. Align the mounting bracket with the anchors and secure it to the wall using the M5x50 lag bolts (A).
Step 2: Attaching the TV to the Bracket
Attach the soft pads (C) to the back of the TV or the bracket as needed. Align the bracket arms with the mounting points on the TV. Secure the TV to the bracket using M6x12 screws (D), M6 nuts (E), and M5/M6 washers (F).
For TV Standview and Other Swivel Brackets Mounting
Step 1: VESA Plate Attachment
Attach the VESA mounting plate to the back of the TV using the provided M8x12 screws (G). Ensure the plate is oriented correctly for your TV's VESA pattern.
Step 2: Connecting to Stand Pole
Attach the plastic sleeves (H) to the stand pole if applicable. Connect the TV assembly (with VESA plate attached) to the main stand pole. Secure using M8 nuts (I).
Step 3: Final Assembly and Adjustment
Complete the attachment of the TV to the stand. Make any necessary adjustments for tilt or swivel as indicated by the diagrams, using the Allen Key/Wrench (J) for tightening.