Product Overview
This document provides instructions for the Kensington Slim NanoSaver® 2.0 series of laptop locks, designed to secure your devices against theft.
Slim NanoSaver® 2.0 Keyed Laptop Lock
Model Numbers: K65021 / K65022
[Diagram: A box opening to reveal a coiled cable lock, lock head, and instruction guide. This represents the Slim NanoSaver® 2.0 Keyed Laptop Lock.]Slim NanoSaver® 2.0 Dual Head Keyed Laptop Lock
Model Numbers: K65023 / K65024
[Diagram: Shows two lock heads connected by a cable, along with an instruction guide. This represents the Slim NanoSaver® 2.0 Dual Head Keyed Laptop Lock.]Slim NanoSaver® 2.0 Portable Keyed Laptop Lock
Model Numbers: K65025 / K65026
[Diagram: Depicts a highly coiled cable lock with a lock head and instruction guide. This represents the Slim NanoSaver® 2.0 Portable Keyed Laptop Lock.]
Device Registration
It is recommended to register your lock for security and support purposes.
⚠️Register your lock at kensington.com/register.
Your lock's six-number serial number can be found on the lock head.
[Diagram: A lock head with a 6-digit combination input area (represented by circles). Below it, the URL kensington.com/register is displayed, followed by a '#' symbol and six empty input boxes, indicating where to enter the serial number.]Installation and Locking
Follow these steps to secure your device.
Step 1: Secure the Cable to a Fixed Point
Loop the cable around a sturdy, immovable object (e.g., a desk leg, a secured anchor point). Feed the lock head through the cable loop and pull taut to create a secure connection.
[Diagram: Shows the K65021/K65022 lock being attached. The cable loop is passed around a table leg, and the lock head is positioned to secure it. An arrow indicates the direction of attachment.]For the Dual Head model (K65023/K65024), ensure the secondary lock head is within reach of the second device to be secured.
[Diagram: Illustrates the K65023/K65024 lock securing both a laptop and a monitor to a desk. The cable is routed through a desk grommet. The dual lock heads are shown attached to the respective devices.][Diagram: Shows the K65025/K65026 portable lock securing a laptop to a desk. The coiled cable is attached to the laptop's lock slot and secured to the desk.]Step 2: Lock the Device(s) to the Cable
Insert the lock head into the device's security slot and engage the lock.
General Locking Mechanism:
- Insert the key into the lock head and turn it clockwise to the unlocked position.
- Press and hold the button located on the lock head.
- While holding the button, insert the lock head firmly into the device's security slot until it clicks into place.
- Release the button on the lock head.
- Turn the key counterclockwise to the locked position.
- Remove the key.
Unlocking Your Device
To remove the lock from your device:
- Insert the key into the lock head.
- Turn the key clockwise to the unlocked position.
- Depress the button on the lock head and hold it down.
- While the button is depressed, remove the lock head from the device's security slot.
Support
For assistance, troubleshooting, or warranty information, please visit the Kensington support website.
Kensington Account
Support | Kensington
