Kensington Slim NanoSaver Combination Laptop Lock

Product Overview

This document provides instructions for the Kensington Slim NanoSaver® Combination Laptop Lock, including the Portable and Ultra Cable Lock models. It details how to secure your laptop and how to reset the combination lock.

Models Covered: Slim NanoSaver® Combination Laptop Lock, Slim NanoSaver® Portable Combination Lock, Slim NanoSaver® Combination Ultra Cable Lock.

Register your lock at kensington.com/register

How to Lock Your Laptop

1. Step 1: Secure the Cable

   Loop the lock cable around a secure object, such as a desk leg or anchor point. [arrow] Ensure the cable is taut.

   Diagram Description: A laptop is on a desk. The lock cable is looped around the leg of the desk and the lock head is near the laptop.

2. Step 2: Attach the Lock Head

   Insert the lock head into the Kensington security slot on your laptop. [arrow]

   Diagram Description: A close-up view shows the lock head being inserted into the security slot of a laptop.

3. Step 3: Set the Combination

   Ensure the lock is in the unlocked position (default is 0000). Turn the combination dials to your desired 4-digit code. [arrow]

   Diagram Description: The lock head is fully inserted into the laptop's security slot. The combination dials are visible, showing numbers like 1, 2, 3, 4.

4. Step 4: Lock the Device

   Turn the lock head 90 degrees to the locked position. [arrow] Then, rotate the combination dials to a random configuration to secure the lock. [arrow]

   Diagram Description: The lock head is turned to the locked position. The combination dials are shown being rotated to a random setting.

How to Reset Your Combination

Note: You must know the current combination to reset it. If you have forgotten the combination, a paperclip is required for the reset procedure.

1. Step 1: Unlock and Prepare

   Ensure the lock is unlocked using the current 4-digit combination (default is 0000). [lock symbol ?] The dials should show 0000.

   Diagram Description: The lock head is shown in an unlocked state with the combination dials set to 0000.

2. Step 2: Insert Paperclip

   Locate the small reset hole on the lock mechanism. Insert a straightened paperclip into this hole. [paperclip] This action holds the reset mechanism in place.

   Diagram Description: A paperclip is being inserted into a small hole on the side of the lock head.

3. Step 3: Hold Reset and Set New Combination

   With the paperclip inserted, turn the combination dials to your new desired 4-digit code. [arrow]

   Diagram Description: The paperclip is holding the reset mechanism, and the combination dials are being turned to set a new code.

4. Step 4: Release and Secure

   Once the new combination is set, remove the paperclip. [arrow] Turn the lock head 90 degrees to the locked position. [arrow] Rotate the dials to a random configuration to secure the lock.

   Diagram Description: The paperclip is removed. The lock head is turned to the locked position, and the dials are rotated to a random setting. A checkmark [check ✔️] indicates success.

Maximum Security Tip

For maximum security, always turn all dials to a random configuration after securing the lock to your laptop.