Instructions for CLEAN WATER STORE models including: Water Test Kit, Test Kit, Kit

Clean Water Systems & Stores, Inc.

Rev08032020 . Sample Instructions: Clean Water Systems & Stores, Inc. 831-462-8500 . www.cleanwaterstore.com Get two empty bottles: 8, 12 or 16 oz., with screw cap lids.


File Info : application/pdf, 1 Pages, 106.63KB

PDF preview unavailable. Download the PDF instead.

Water-Sample-Test-Instructions
831-462-8500 www.cleanwaterstore.com support@cleanwaterstore.com

Sample Instructions:
Get two empty bottles: (4 to 12 oz) with screw cap lids or use the ones we have sent you. Bottles from bottled water work great. One bottle is for a `raw' sample and the other is for a `treated' sample.
For the raw water sample, write the letter "R" with a Sharpie on the bottle.
The raw sample should be taken as close as you can to the well source or any other source (city system, lake etc.) from which you get your water and before any treatment systems, such as from an outside hose bib.
Let the water run fast for two to three minutes, then slow for 5 minutes. Run longer for wells over 150' deep.
Rinse the bottle with the water to be tested once or twice and then fill the bottle to top so there is no air bubble.
Do the same to fill the second sample bottle with treated water. Write "T" for treated on the bottle. The treated sample should be from inside the house, after the last piece of filter equipment or softener (if you have a treatment system).
After screwing the cap on securely, you must tape the cap down where the bottle and cap meet and then place samples in a plastic bag to avoid leaking during shipping.
Pack sample bottles in a box along with the completed Water Test Form and padding.
Attn: Water Testing Clean Water Systems & Stores, Inc. 2806-A Soquel Avenue Santa Cruz, CA 95062
Test results include: Alkalinity, Copper, Hardness, Iron, Manganese, Nitrate, Nitrite, pH, ORP, Total Dissolved Solids

Water Test Form

Name

Address

City

State

Zip Code

Phone

Email

Water Source
e.g.: home / community well, city water
Hot water has rotten-egg odor

Date Cold water has rotten-egg odor

Water Test for Existing Treatment System? Yes No Water Test (no treatment system currently) Yes No
Please provide any questions or comments you may have, any relevant background information

Time

Office Use: Date Received

Date Sample Tested

Please Note: While we use standardized methods and prioritize accuracy, our water tests are provided for educational purposes and do not provide a certified water analysis. We do not test for bacteria or other health-related contaminants. Results can vary. Clean Water Systems Inc. neither accepts or assumes any liability associated with the test kits or any recommendations based on the analysis. No warranty or guarantees are extended.



References

Adobe PDF Library 17.0 Adobe InDesign 18.5 (Windows)