FTX LC 024 ST5 2D Imager USB Omni-directional Fixed Barcode Scanner

Restore Factory Defaults

Scan the following configuration QR code to restore the scanner to factory default settings.

Default Configuration: Interface: USB, Operation Mode: Auto-trigger, End Character: Enter

Interface Configuration

USB Interface

Scan the following configuration QR code to set the scanner to USB interface mode.

Default: USB

USB COM (Virtual COM Port)

To connect the scanner to devices via a USB cable, scan the following QR code to configure the scanner in virtual COM output mode. A driver will be required; please contact your supplier for driver installation.

Default: Virtual COM

Version Information

Scan the following QR code to obtain version information for this scanner.

COM (RS-232) Configuration

When connecting the scanner to a device via the RS-232 interface, ensure that the scanner and device configurations match. The default COM interface configuration is: 115200 baud rate, 8 data bits, no parity bit, 1 stop bit.

Serial Port Parameter Configuration (Baud Rate)

• 600bps
• 1200bps
• 2400bps
• 4800bps
• 9600bps
• 57600bps
• 115200bps

Data Bits

• 7 Bits
• 8 Bits

Parity Bits

• None
• Odd
• Even

Stop Bits

• 1 Bit
• 2 Bits

Language Configuration

• English (US)
• English (UK)
• French
• Italian
• German
• Spanish
• Portuguese
• Hungarian
• Swedish
• Slovak
• Russian
• Latin America
• Turkish

Keyboard Configuration

Virtual Keyboard Configuration

The user can configure the suffix using the following configuration codes.

• Standard Keyboard
• Virtual Keyboard
• No Suffix
• CR+LF
• CR
• TAB

Barcode Reading with Inverted Image

Scan the QR code below to enable or disable reading barcodes with an inverted image.

Barcode Type Reading Configuration

Scan the QR code below to enable or disable the reading of specific barcode types. Note that enabling all 1D/2D barcode readings may reduce decoding speed. It is recommended to select only the necessary barcode types to improve decoding performance.

Enable/Disable Barcode Types:

• Code 39
• Code 39 Full ASCII
• Code 32
• Interleaved 2 of 5 (ITF25)
• Industrial 2 of 5
• Matrix 2 of 5
• EAN-13
• EAN-13 Complement
• Convert EAN-13 to ISBN
• Convert EAN-13 to ISSN
• GS1 DataBar (RSS14)
• Composite Code

Codabar

• Enable Codabar
• Disable Codabar
• Enable Codabar Start/Stop Transmission
• Disable Codabar Start/Stop Transmission

GS1 Rule

GS1 rules are currently supported. Compatible AI segments include: (00) Shipping Container Serial Number, (01) Trade Item Identification, (02) Trade Item Identification, (10) Batch Number, (11) Production Date, (13) Packaging Date, (15) Best Before Date, (17) Expiration Date, (21) Serial Number, (30) Quantity, (240) Internal Code, (712) National Medical Insurance Reimbursement Number - Spain CN, (8012) Software Version, (90) Consistent Information Between Business Partners.

Warranty Information

The ecological use period for this product is 10 years. Climatic conditions for operation, storage, and transportation are specified in the product's technical characteristics.

Warranty Terms:

1. Customers can exercise their legal rights using the purchase invoice and warranty card without additional procedures.
2. All warranty items are subject to the warranty clauses and user notice published by the company.
3. The product will not be guaranteed if it falls into any of the following situations, but maintenance service may be offered at a cost:
   • (1) Damage caused by improper use or incorrect handling;
   • (2) Damage caused by maintenance performed by non-professional personnel;
   • (3) No warranty if the warranty card is missing, the model does not match the product, or the warranty card has been altered.
   • (4) Irresistible damage (e.g., lightning, earthquakes, fires, or other natural disasters).
4. Please complete the warranty card. Do not alter or erase its content, otherwise, maintenance service will be charged.
5. Please keep this card in good condition. No additional warranty card will be issued.

Barcode Scanner Warranty Proof

This form has been prepared in accordance with the provisions of standard SJ/T 11364.

Indicates that the content of harmful substances in all homogeneous materials of the component is below the limit specified in standard GB/T 26572.

Indicates that the content of harmful substances in at least one homogeneous material of the component exceeds the limit specified in standard GB/T 26572.

Note: 1- Most components of this product use harmless and environmentally friendly materials. However, due to international technological limitations, some harmful materials cannot be replaced. 2- Reference environmental data has been tested under normal product use and storage conditions, including humidity and temperature requirements.

User Name:

Address:

Date of Purchase:

Serial Number:

Hazardous Substances

Legend: X - Exceeds limit, O - Below limit