VEVOR Telescopic Pole Saw User Manual

Introduction

This document is the original instruction manual for the VEVOR Telescopic Pole Saw. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the item received. Updates to technology or software may occur without prior notification.

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and do not necessarily apply to all product categories. Customers are advised to verify savings carefully when placing an order.

Product Components

The product includes the following components:

• Chenille Microfiber Duster (1)
• Saw with hooks (1)
• Aluminum telescopic pole (1)
• User manual (1)

The main components are:

• Chenille Microfiber Duster: A soft cleaning and dusting attachment.
• Saw with hooks: A saw blade attachment with a hook for pulling branches.
• Flip clamp lock device: Mechanisms used to extend and secure the telescopic pole sections.
• Aluminum telescopic pole: The extendable main body of the tool.
• Sponge handle: The grip area at the end of the pole.

Installation

Before proceeding, unpack the product and verify all parts are present: Chenille Microfiber Duster*1, Saw with hooks*1, Aluminum telescopic pole*1, User manual * 1.

Chenille Duster Installation

Take the chenille duster and the telescopic pole. Screw the chenille duster onto the screw head of the telescopic pole. Tighten securely for use.

Saw with Hooks Installation

1. Remove the fixing screws from the black handle of the saw with hooks. Set them aside for later use.
2. Attach the black handle of the Saw with hooks to the connecting pole at the head of the telescopic pole. Align the holes, insert the fixing screws, and tighten them to secure the attachment.

Operating Instructions

Telescopic Pole Extension

1. Open the flip clamp and keep it outward.
2. Pull out the inner section of the pole to the desired length and close the flip clamp to secure it.

Telescopic Pole Folding

1. Open the flip clamp and keep it outward.
2. Fold the inner section back into the outer section of the pole and close the flip clamp.

Attention Matters

• The saw blades are sharp. Exercise caution during installation and use.
• This product is constructed from an assembled multi-section aluminum pole. Avoid performing destructive tests on the product to prevent damage to the extension pole connectors and the saw.
• When installing the saw attachment, ensure all screws are properly tightened to prevent the saw blade from loosening and causing accidents.
• After using the product, it is recommended to disassemble it and store it cleanly and safely.
• A slight bending may occur when the telescopic pole is extended horizontally. This is a normal characteristic of this type of product and does not indicate a quality issue.

Manufacturer Information

Manufacturer: Hangzhou Orientjohn Industry Co., Ltd.

Address: No. 1, Hanma Road, Tongyi Village, Linpu Town, Hangzhou, Zhejiang, China, 311251.