Bluestone™ Wireless Charging Gravity Mount (MCW5)

Introduction

This Bluestone wireless charging gravity mount is designed to simplify your driving experience by charging your phone while you use it for navigation or other essential tasks. It ensures your phone remains powered up, eliminating the need to choose between navigation and battery life.

Package Contents

• 1x Wireless Charging Mount
• 1x Air Vent Clip
• 1x Fixed Mount Clip
• 1x Charging Cable

Product Overview

The mount features a gravity-activated clamping system that securely holds your smartphone. Key components include:

• Wings: Adjustable arms that automatically close to grip the phone when placed in the mount.
• Feet: Supports at the bottom to further stabilize the phone.
• Charger Pad: The surface where the phone rests and wirelessly charges.
• Clamp Lever: A mechanism, often integrated with the wings, to adjust or secure the grip.
• Micro Port: The input port for the charging cable.
• Clamp: Refers to the overall gripping mechanism.

The mount comes with two attachment options: an Air Vent Clip for easy installation on car vents and a Fixed Mount Clip for adhesion to any flat surface.

Specifications & Features

• Dimensions: Approximately 10.5cm height x 9.5cm width x 5cm depth.
• Mount Type: Gravity Clamp with rubber grips for secure holding.
• Support: Feet to support the phone from falling.
• Included Mounts: Bonus Fixed mount to adhere to any flat surface.
• Rotation: 360° rotating phone bracket for adjustable viewing angles.
• Protection: Overheating Protection.
• Installation: Easy Installation; Vent Clip fits easily into any vent system.
• Compatibility: Compatible with wireless charging devices.
• Power Output: 10 W Fast Charging.
• Input: DC 5V/2.0A, DC 9V/1.67A.
• Output: DC 5V/1.0A, DC 9V/1.2A.

How to Use

Follow these steps to set up and use your Bluestone Gravity Mount:

1. Unbox all components and verify all items are present.
2. Align the mount head with the chosen clip (Air Vent Clip or Fixed Mount Clip).
3. Attach the clip to the back of the mount head. For the vent clip, loosely screw the joint part onto the back of the mount head. Leaving it loose allows the ball joint to pop into the socket easily.
4. Once the ball joint is seated in the socket, tighten the knob securely.
5. Repeat steps 3-4 for the fixed mount backing if using that option.
6. Position the mount on your car's dashboard or air vent in your desired location.
7. Connect the USB end of the charging cable to your car's power source (e.g., car charger adapter).
8. Plug the Micro B port of the cable into the mount head to power the device.
9. Place your phone onto the mount. The wings will extend outwards to accommodate your phone's size.
10. Gently push the phone down into the mount. The wings will automatically close, securing the phone, and the feet will adjust to support it.
11. Ensure your phone case is not too bulky, as it might obstruct the wireless charging connection.
12. Your phone should begin charging immediately. If not, check the case thickness and ensure all connections are secure.

Care and Safety

• Do not use this unit for purposes other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquids.
• Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children.
• This unit is not a toy.