SONOFF iPlug Outdoor Wi-Fi Smart Plug - Quick Guide

Product Overview

The SONOFF iPlug Outdoor Wi-Fi Smart Plug is a smart plug designed for outdoor use, allowing you to control connected appliances remotely via Wi-Fi. It supports integration with major smart home platforms.

Getting Started

Download the eWeLink App

To begin, download the eWeLink App from your device's app store. The app is available for iOS and Android devices. You can also integrate the plug with Apple Home, Google Home, Amazon Alexa, and SmartThings using Matter.

Power On

Connect the SONOFF iPlug Outdoor to a power outlet.

Pairing Mode

Upon initial power-up, the device automatically enters pairing mode. The Wi-Fi indicator light will flash in a pattern of "two short flashes followed by one long flash" [indicator-pattern].

If the device exits pairing mode (e.g., after 10 minutes without connection), press and hold the device button for approximately 5 seconds until the Wi-Fi indicator light returns to the "two short, one long" flashing pattern to re-enter pairing mode.

Pairing Methods

Method 1: Matter Pairing

Open a Matter-compatible smart home app. Scan the Matter QR code located on the device to add it to your network. This method facilitates seamless integration with various Matter-supported ecosystems.

Method 2: eWeLink App Pairing

Open the eWeLink App. Scan the QR code on the device within the app. Follow the on-screen instructions provided by the eWeLink App to complete the pairing process.

Note: If the page does not display after scanning the code, navigate to the 'Add Device' section in the eWeLink App homepage (typically accessed via a '+' icon in the top right corner) to proceed.

Device Usage and Features

IP Rating

The device achieves an IP53 protection rating when installed vertically downwards and with the waterproof cover fully closed. This rating ensures protection against dust ingress and water spray.

Installation Guidance

For optimal performance and to maintain the IP53 rating, install the device vertically downwards and ensure the waterproof cover is completely sealed.

Technical Specifications

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Compliance (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003(B). This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

ISED Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Certifications

Conforms to UL STD.60730-1. Certified to CAN/CSA STD.E60730-1.

Manufacturer Information

Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China, ZIP code: 518000.
Website: sonoff.tech
Service email: support@itead.cc

User Manual

For detailed information, please refer to the user manual available at: https://sonoff.tech/usermanuals