Lepro LED Camping Lantern

Product Overview

This document is the user guide for the Lepro LED Camping Lantern, model PR330033.

Parts Identification

The lantern consists of the following parts, as indicated in the diagram:

• 1) Handle
• 2) Diffuser
• 3) Switch button
• 4) Battery compartment
• 5) 1.5V D sized batteries (not included)
• 6) Lamp base
• 7) Hook

Dimensions: Height: 190 mm / 7.48 in, Width: 101 mm / 3.97 in, Base Diameter: 33 mm / 1.30 in. Battery size required: D.

Features and Operation

Battery Installation

Important: Do NOT use rechargeable batteries. Use only 1.5V D-sized batteries (not included). Ensure batteries are properly inserted before use.

Brightness Adjustment

Long press the switch button ✋ [long press] to adjust brightness.

Light Modes

Short press the switch button (< 2.5s) to cycle through modes. Long press (> 2.5s) to turn the light on/off.

• Daylight White
• Warm White
• Combined
• Flashing Red

Important Safety and Usage Notes

• Inspect the lamp carefully before usage.
• This product is not submersible.
• Do not modify the lantern during the warranty period.
• The lantern has no memory function.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• Remove batteries from the lamp if it has not been used for a long time, in case battery leakage damages the lamp.
• To avoid any damage to the lantern, do not use any chemical solvents during routine maintenance.
• Clean the lantern regularly to ensure better lighting.
• Do not use rechargeable D-size batteries for the lantern.

Environmental Compliance (WEEE Directive)

This product is subject to European Directive 2012/19/EC. The symbol ♻️ [recycling symbol] showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol must not be discarded with normal household waste but must be taken to a collection point for recycling electric and electronic appliances. Recycling helps to reduce the consumption of raw materials and protect the environment.

Manufacturer and Support Information

For service and support, please refer to the following:

Manufacturer:

LEPRO INNOVATION INC.
3651 Lindell Road Suite D1048, Las Vegas, NV 89103, USA
Website: www.lepro.com
Email: cs@lepro.com
Phone: +1 866-287-2558

Manufacturer / Hersteller:

LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
Website: www.lepro.de
Email: cs@lepro.de
Phone: +49 800-723-6202

UK Importer:

Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
Website: www.lepro.co.uk
Email: cs@lepro.co.uk
Phone: +44 800-802-1244

Canada:

Le Ming Trading Inc.
801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA
Website: www.lepro.ca
Email: cs@lepro.ca
Phone: +1 833-433-1453

Japan:

Address: 〒135-0063 東京都江東区青海２丁目６−３Ｆ
Phone: 080-0080-5654

Made in China