Logitech G HUB Features and G435 Headset Guide

Using On-Board Memory Mode with Logitech G HUB

On-board memory functions allow you to store settings directly on your Logitech gaming device using G HUB. This enables you to transfer settings, such as mouse DPI, to another computer without needing G HUB installed.

To enable On-board memory mode:

1. Select your device within G HUB.
2. Click the settings icon in the top right corner.
3. Toggle the button to ON.
4. Choose the profile you wish to save to your mouse's on-board memory.

[Visual Description: A section labeled 'ON-BOARD MEMORY MODE' with a toggle switch set to 'ON'. Below it, 'SLOT 1 PROFILE 1' is displayed, with an option to 'RESTORE ALL PROFILE SLOTS TO DEFAULT'.]

Customizing Gaming Mouse Pointer Speed with Logitech G HUB

To customize your mouse's pointer speed:

1. Launch G HUB and select your product from the main window.
2. Adjust the slider or select a preset DPI speed.

[Visual Description: A representation of DPI speeds with a slider. Markers indicate specific DPI values like 400, 1550, 1600, and 3200. The slider can be adjusted, and users can click on the slider to create new DPI speeds.]

Using Your G435 Gaming Headset on Nintendo Switch

The Nintendo Switch allows pairing of only one Bluetooth audio device at a time and does not support Bluetooth microphones. The Nintendo Switch Online App can be used for select games to communicate with other players.

Logitech G435 Gaming Headset Connectivity with Nintendo Switch

The G435 headset was developed before Nintendo released native Bluetooth functionality. Early versions could not connect to the Nintendo Switch via Bluetooth. This issue has been resolved for future production. If you encounter connection problems with your G435 on Nintendo Switch, updating the firmware is recommended. The G435 LIGHTSPEED Wireless Gaming Headset Update Tool can be downloaded for this purpose.

To update the firmware:

1. Ensure your G435 headset is connected to its receiver and powered on.
2. Verify the battery level is at least 30%. Refer to specific instructions for checking battery level if needed.
3. Run the downloaded .exe file.

[Visual Description: A window titled 'Logitech G435 LIGHTSPEED Wireless Gaming Headset Update Tool 3.0.1.81'. It displays a message: 'Please connect your Logitech G435 LIGHTSPEED Wireless Gaming Headset receiver and power on your device. Ensure the headset is in LIGHTSPEED mode and your headset battery is at least 30%.' A 'Continue' button is visible.]

Click 'Continue' and follow the on-screen instructions.

[Visual Description: A window titled 'Logitech G435 LIGHTSPEED Wireless Gaming Headset Update Tool 3.0.1.81'. It states: 'This application will apply a critical firmware update (3.0.1.81) to your G435 LIGHTSPEED Wireless Gaming Headset. While your G435 LIGHTSPEED Wireless Gaming Headset is updating, it will not be functional. Please wait until the update has completed.' A 'Release Notes' section shows 'Apply optimizations and minor fixes'. A progress bar indicates 'Updating firmware. Do not unplug your G435 LIGHTSPEED Wireless Gaming Headset.']

Once the firmware update is complete, a confirmation window will appear.

[Visual Description: A window titled 'Logitech G435 LIGHTSPEED Wireless Gaming Headset Update Tool 3.0.1.81'. It shows a success checkmark icon and the message: 'You have successfully updated the firmware.' A 'Close' button is visible.]

Important Note: If the firmware update process is interrupted, the update may fail. In such cases, perform a hard reset by inserting a SIM ejector tool into the reset button for two seconds until the green light blinks. The reset button is located under the left earpad.

Checking the Battery Level of Your G435 Headset

With the headset powered ON, single-press the Power button to check the battery status:

• LED shows green for five seconds: Battery is between 31% to 100%.
• LED shows red for five seconds: Battery is between 15% to 30%.
• LED flashes red for five seconds: Battery is less than 15%.

[Visual Description: A diagram showing a hand pressing the power button on the G435 headset. An indicator shows '5 sec.'. The LED status is described for different battery levels: green for 31-100%, red for 15-30%, and flashing red for less than 15%.]

Cleaning Your Logitech G435 Headset

Logitech provides recommendations for cleaning the G435 headset.

Before you clean:

• Do not wash ear pads in a washing machine.
• Do not dry ear pads in a tumble dryer.
• Avoid applying cleaning liquids directly to earpads and headband.
• Do not use bleach, acetone, nail polish remover, strong solvents, or abrasives, as these may affect the polyester fabric surface and cause discoloration.
• When using cleaning sprays, spray onto a cloth first, then wipe the product; do not spray the product directly.

Wiping and cleaning your G435:

• To clean, use regular tap water to lightly moisten a clean, soft, lint-free cloth. Gently wipe down the headband and ear pads.
• For tougher stains, use a small amount of mild soap on a lightly moistened, clean, soft cloth. Gently rub the stained areas and rinse thoroughly with the same moistened cloth until all soap traces are gone.
• Fragrance-free disinfecting wipes or fragrance-free anti-bacterial wet wipes can also be used.
• Allow the headset to dry at room temperature.

Logitech encourages users to sanitize their products in accordance with guidelines from the World Health Organization and the Centers for Disease Control.