Rohde & Schwarz HMO1002 6+1: Simply More Value

Agenda

• ▶ Introduction
• ▶ Applications, Target Customers, Value Proposition
• ▶ Product Description, Key Specs
• ▶ Competition
• ▶ Supporting Material
• ▶ Ordering Information, Suggested Options and Prices

Value Proposition

• First entry-level oscilloscope from R&S, developed by Hameg R&D in Germany and manufactured in Europe to high quality standards.
• Entry-level 6+1 oscilloscope with state-of-the-art functionality and best-in-class sensitivity.
• Economy Scope/MSO for general-purpose applications in electronic design and lab environments.
• Integrated MSO capability and 5 additional bench functionalities at a best-in-class price-performance ratio (6+1).
• Education Mode: Tailored for use as a "Class Room" Scope.
• Lowest vertical noise in its class.
• Lowest audible noise (fanless) in operation.
• QuickView and QuickMath for fastest access to demanding functions.
• Fastest boot time (under 5 seconds).
• MSO as standard (8 digital inputs), logic probe required.
• Trigger and Decode for I²C, SPI, UART/RS-232, CAN, LIN available as a low-cost option.
• Protect investment: The HMO platform allows for new functions to be retrofitted via firmware upgrade.

Applications and Target Customers

Applications

• ▶ Analog circuit design
• ▶ Mixed signal design and debug
• ▶ Embedded design and debug
• ▶ Education and service

Target Customers

• ▶ Engineers designing mixed signals and embedded circuits (automation, automotive, medical, cellular).
• ▶ Power electronics professionals (Switch Mode Power Supply / Power Inverter design, motor controls).
• ▶ Education customers.
• ▶ Service technicians requiring a light, small, yet powerful instrument with fast boot time and no need for battery operation.

The HMO1002 6+1 at a Glance

The Rohde & Schwarz HMO1002 is a mixed-signal oscilloscope offering 6+1 integrated functions.

Oscilloscope Description: The instrument features a color display showing multiple waveforms, including digital channels. The front panel has numerous buttons for control, including channel selection, trigger settings, measurement functions, and navigation. Input/output ports are visible on the front and rear panels.

R&S HMO1002 6+1 Main Specifications (Built-in)

1+1: MSO (Mixed Signal Oscilloscope)

• 8 digital channels.
• Built-in Logic Analysis with HO3508 Probes (or RT-ZL03 Logic Probes).
• Compatible with existing HO3508 Probes.
• 0.5 Mpts Memory Depth per Channel.
• Note: For full operation, the optional Logic Probe HO3508 is needed.

Logic Probe Description: An image shows an 8-channel logic probe (HO3508, 350 MHz, 4pF) with multiple colored wires connecting to digital input pins.

2+1: Pattern Generator

• Generates patterns with up to 50Mbit/s.
• Sample size up to 2kBit/Channel.
• Predefined patterns available for SPI, I²C, UART, CAN/LIN.
• Custom specific patterns can be generated to stimulate circuits and embedded designs.

Signal Pattern Description: A diagram illustrates digital signal transitions for SCK, MOSI, and MISO signals, showing data bits and 3-state conditions, typical for serial communication protocols like SPI.

Protocol Descriptions:

• SPI: Serial Peripheral Interface
• I²C: Inter-Integrated Circuit
• UART: Universal Asynchronous Receiver/Transmitter
• CAN: Controller Area Network
• LIN: Local Interconnect Network

3+1: Voltmeter

• Measures ACrms, DC, DCrms, PeakPeak.
• Full automatic measurement.
• Measures up to 2 Channels simultaneously.
• Displays the Crest factor.
• Clear and simple 3-digit display.
• Ideal for education, quick, and simple measurements.

Voltmeter Display Description: A waveform screenshot shows a sine wave with a superimposed digital signal. The display indicates measurement values, including a Crest Factor of 4.56.

Crest Factor Definition: Crest factor is the peak amplitude of the waveform divided by the RMS value of the waveform.

4+1: Spectrum Analyzer

• High dynamic range, 128kPt storage.
• FFT-based spectrum analysis: powerful and user-friendly.
• Best FFT Analysis in its class.
• Easy to use and flexible: first results with only 2 clicks.
• Spectrum analyzer look-and-feel.
• High measurement speed and fast display.
• Auto Set function in FFT mode for optimal settings.

Application Examples:

• ▶ EMI Debugging
• ▶ VCO Testing (correlated time and frequency analysis)
• ▶ Spectral measurements

Definitions:

• FFT: Fast Fourier Transform
• VCO: Voltage-Controlled Oscillator

Spectrum Analyzer Display Description: A screenshot shows a spectrum analysis plot with frequency on the x-axis and amplitude (dBm) on the y-axis, displaying a signal with markers indicating frequency and amplitude.

5+1: Function Generator

• Equipped with a Function Generator for DC, Sine, Square, Pulse, and Triangle waves up to 50kHz.
• 50 Ohm Output.
• Output range: 60mV to 3Vpp @ 50 Ohm.
• DC-Offset: +/-3V.
• Ideal for educational environments to generate standard waveforms.

Waveform Description: Diagrams show Sine, Square, Triangle, and Sawtooth waveforms.

6+1: Component Tester

• 2-pole test of passive components (R, L, C) and semiconductors (diodes).
• Displays U/I curves.
• Ideal for finding defective components and for educational purposes.

Component Tester Examples:

• ▶ Diode & Resistor (680R) in parallel
• ▶ Two Diodes in anti-parallel
• ▶ Diode & Resistor (51R) in series
• ▶ Bipolar transistor & Resistor (680R) in parallel
• ▶ Bipolar transistor, Resistor (680R), & Capacitor (1uF)
• ▶ Silicon diode & Capacitor (10uF) in series

Component Tester Display Description: Screenshots show U/I curves for various component configurations, illustrating their electrical characteristics.

Educational Mode

Ideal for education:

• ▶ Enable or disable comfort features such as: AUTO SET, QUICK VIEW, AUTO MEASURE.
• Screen Identifier for manual measurement mode.

Educational Mode Image Description: An illustration shows a graduation cap on a stack of books, symbolizing education.

7+1: Production Tester

• Pass / Fail - Mask testing.
• Based on mask discrimination.
• Signal must be within defined boundaries.
• Events definable for fail: acoustic, pulse out, print.
• Ideal for production testing and quality checks in lab environments.

Production Tester Mask Description: A waveform is shown overlaid with a mask, indicating whether the signal passes or fails based on its adherence to the mask boundaries.

Competitive Landscape

Views

The document includes various views of the HMO1002 oscilloscope, showcasing its front panel, rear panel, and display details.

Front Panel Description: The front panel features a large color display, numerous control buttons, input connectors (CH1, CH2, EXT TRIG IN, AUX OUT), USB ports, and logic analyzer probe connectors.

Rear Panel Description: The rear panel includes a power switch, power input connector, LAN port, USB port, and an external trigger connector. Labeling indicates power specifications (max 25W, AC 50-60 Hz, 100-240V) and manufacturing details (Engineered in Germany, Manufactured in Czech Republic).