POGS The Gecko Bluetooth Headphones Quick Start Guide
Get started in 4 steps
Turn on the headphones
Press the power button [power button] on the headphone unit. The LED indicator [LED indicator] will blink blue rapidly.
Enter pairing mode
Slide the power button [power button] to the right. The LED indicator [LED indicator] will blink blue and white rapidly.
Connect to Bluetooth™ device
On your device, turn on Bluetooth™ and select 'My POGS wireless headphone'. The LED indicator [LED indicator] will blink blue slowly.
Control your music from the connected device
Use the connected device to control music playback.
What else can I do?
A Play/Pause music on your POGS headphones
Press the play/pause button [play/pause button] on the headphone unit to play or pause music.
B Share music using POGLink
Connect the POGLink cable between two POGS headphones to share music.
- Connect the triangular ? plug of the POGLink cable firmly into the left earcup of your POGS headphones.
- Connect the other end of the POGLink cable to the left earcup of another POGS headphones.
C Out of battery? Connect device with QuickSafe cable
Connect your device using the QuickSafe cable when the battery is low.
- Connect the round ⭕ plug of the QuickSafe cable to the right earcup of your POGS headphones.
- Connect the angled plug to your device (phone, tablet, PlayStation, etc.).
D Charge the battery
Connect the charging cable to the headphones and your own USB adapter. Plug the adapter into a power socket. The LED indicator [LED indicator] will be white while charging.
