EYESUN QM-2301W Elliptical Training Machine User Manual

Important Information

IMPORTANT! Please keep this owner's manual for maintenance and adjustment instructions. Your satisfaction is very important to us. PLEASE DO NOT RETURN THIS PRODUCT BEFORE CONTACTING US.

Email: support@eyesun.net

Phone: +008617510497005

Introduction and Safety Precautions

Please read this instruction manual carefully before using the fitness equipment.

⚠️ WARNING

1. Improper exercise techniques or excessive use may negatively impact your health. EYESUN is not responsible for any injuries caused by sudden medical conditions or misuse of this equipment.
2. To minimize the risk of injury, always adhere to fundamental safety precautions when using this fitness equipment, including the following guidelines.

Disclaimers

All information, illustrations, and specifications in this manual were in effect at the time of publishing. The illustrations used in this manual are intended as representative reference views only. EYESUN reserves the right to make any specification or design changes without notice.

ALL RIGHTS RESERVED

All rights reserved. No part of this manual may be reproduced in any form without written permission from EYESUN Equipment.

Updates and Product Registration

The latest User Manual for EYESUN products can be found under the support tab at EYESUN.net/pages/manuals. You can scan the provided QR code with your smartphone camera to be directed to the link.

For trouble-free warranty coverage, it is important to register your EYESUN product. You can register by:

• Registering your product online at: EYESUN.net/pages/warranty.

For Your Records:

• Date of Purchase: [____________________]
• Model Number: [____________________]
• Serial Number: [____________________]
• Place of Purchase: [____________________]

Alternatively, send the following product information to: EYESUN Warranty Registration.

IMPORTANT: Keep your purchase receipt for trouble-free warranty coverage.

? DANGER

Read this manual before use or maintenance. Failure to follow instructions and safety precautions may result in serious injury or death.

General Safety Instructions

Pre-Exercise Consultation

Before beginning any exercise program, consult your physician to determine if you have any existing injuries or medical conditions that may pose a risk to your health and safety or prevent you from using this equipment. If you are currently undergoing medical treatment for heart rate regulation, blood pressure, or cholesterol levels, your doctor's advice is especially important.

Usage Guidelines

1. This workout equipment is not intended for use by individuals (including children) with reduced physical, sensory, or mental abilities, or those lacking experience and knowledge, unless they have been given supervision or instruction on its use by a responsible person.
2. Pay close attention to your body's signals. Caution: Improper or excessive exercise may be detrimental to your health. If you experience pain, chest tightness, irregular heartbeat, shortness of breath, dizziness, fainting, or any discomfort, stop exercising immediately and consult a doctor before continuing your workout regimen.

Product Notice

Thank you for choosing EYESUN!

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.

Keep this manual for future reference. If you have a question or experience a problem with your EYESUN purchase, call EYESUN at +0086-175-1049-7005.

HAVE QUESTIONS?

Email us at support@EYESUN.net or call +008617510497005.

Warm-Up Exercises

Do stretches before exercising. Warm muscles are easier to stretch, so start with a 5-10 minute warm-up, then perform the stretches shown below. Perform each stretch 5 times, holding for 10 seconds or more per leg. Repeat after your workout.

1. Stretch Down: Bend your knees slightly and slowly bend your body forward. Relax your back and shoulders, and try to touch your toes with your hands. Hold for 10-15 seconds, then relax. Repeat 3 times.
2. Seated Hamstring Stretch: Sit with one leg straight. Bring the other leg in so that it is close to the inside of the straightened leg. Try to touch your toes with your hands. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
3. Calf and Achilles Tendon Stretch: Stand with both hands against a wall or a tree, and place one foot behind the other. Keep the back leg straight with your heel on the ground, and lean toward the wall or tree. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
4. Quadriceps Stretch: Reach back with your right hand, grab your right foot, and slowly pull it toward your hips until you feel a stretch in the front of your thigh. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
5. Sartorius (Inner Thigh Muscle) Stretch: Sit with your feet facing each other and your knees pointed outward. Grab your feet with both hands and gently pull them toward your groin. Hold for 10-15 seconds, then relax. Repeat 3 times.

Safe Use Instructions

1. Please make sure you have read this manual thoroughly before assembling and using this device. Proper installation, maintenance, and usage are essential for achieving safe and effective results. Ensure all users are informed of all warnings and precautions.
2. Before starting any exercise program, consult your doctor to determine if any injuries or medical conditions may endanger your health and safety or prevent you from using this equipment. If you are currently taking medication for heart rate, blood pressure, or cholesterol levels, your doctor's advice is very important.
3. Please be aware of your body's signals. Warning: Improper or excessive exercise can harm your health. If you feel pain, chest tightness, irregular heartbeat, shortness of breath, collapse, dizziness, or any discomfort, stop exercising immediately and consult a doctor before continuing your exercise plan.
4. Please supervise your children and keep them away from this device. This device is only suitable for adults.
5. Please place this device on a hard, level, protective, or carpeted surface. To ensure safe use, leave at least 0.5 meters (approximately 1.6 feet) of free space around it.
6. Before exercising, please check that all screws, nuts, and other hardware parts are fully and securely installed.
7. Warning: This equipment can only be used safely if parts subject to wear/damage are checked regularly.
8. Warning: Please place the device on a stable and completely level surface for installation. Use according to the instructions. If you find any defective components during installation or inspection, or hear unusual noises during use, stop using it immediately. Do not use the device until the relevant problems are resolved.
9. Please wear fitted sportswear during exercise and avoid wearing loose clothing to prevent getting caught in any moving parts.
10. This device has passed relevant SGS standards and is suitable for home use. The maximum user weight is 330 lbs.
11. When lifting and moving the machine, be careful to avoid back injuries. Use proper lifting techniques and seek assistance if necessary.
12. All movable parts need to be maintained regularly every week (e.g., cranks, flywheels). Please check them before each use. If they are found to be broken or loose, please repair or replace them immediately. You can continue to use them after they are restored to good working condition.
13. Pay special attention to the parts that are most susceptible to wear.
14. Please adjust all adjustable parts to the maximum value before installation.
15. This product is fitness equipment for adults. Children should use it under the supervision of their guardians.
16. Please do not use this product to perform dangerous actions.
17. If this product is used under the guidance of fitness professionals, it will achieve better results. This product is a Class C indoor exercise bike and cannot be used as medical auxiliary equipment. Please be aware of this.
18. Warning: Exercise methods and excessive use will harm your health! EYESUN will not be held responsible for injuries caused by sudden illness or illegal operation.
19. Please make a reasonable training plan before use and use this product strictly according to the plan.
20. The resistance of this product is adjustable; please choose the appropriate resistance.
21. Please use this product safely, referring to the instructions for use.
22. Please check all knobs and screws carefully before use to ensure your safety.
23. The base needs to be tightened during installation. After installation, except for resistance and display adjustments, other adjustments must be made before use and fixed with screws. It can only be used after confirming it will not loosen.
24. The product needs to be placed on a level surface. If the surface is uneven, the base of the equipment can be adjusted to balance the product.
25. After stopping use, increase the resistance to the maximum to prevent unsupervised children from accidentally using it. It is forbidden to use it without supervision.
26. When operating the exercise bike, ensure there is at least 1 meter (approximately 3.3 feet) of safe operating space around the exercise bike. The product occupies an area of 47.2 x 20.1 x 65.0 inches.

Parts List

Hardware Package Description

The hardware package contains various fasteners and tools for assembly:

• Fasteners:
  • Ø10 washers (4 PCS)
  • Ø20*Ø10.5*1.5T washers (4 PCS)
  • M8 washers (11 PCS)
  • Ø16*Ø8.5*1.5T washers (11 PCS)
  • M10 washers (2 PCS)
  • Ø20*Ø10.5*1.5T washers (2 PCS)
  • Ø20*Ø8.5*1.5T washers (4 PCS)
  • M8 washers (4 PCS)
  • M10*16 screws (4 PCS)
  • M8*85 screw (1 PCS)
  • M10*70 screws (2 PCS)
  • M8*75 screws (4 PCS)
  • Ø3.8*110 pin (1 PCS)
  • M8*16 screws (4 PCS)
  • M8*40 screws (4 PCS)
  • M8*45 screws (6 PCS)
  • M4*15 screws (4 PCS)
  • M10 lock nuts (2 PCS)
  • 19-17-15-13 wrench (1 PCS)
  • 6MM Allen wrench (1 PCS)
  • 5MM Allen wrench (1 PCS)
• Tools:
  • 5MM Allen wrench (1 PCS)
  • 6MM Allen wrench (1 PCS)
  • 19*17*15*13*170L Cross open end wrench (1 PCS)

Installation Steps

Follow these steps carefully to assemble your EYESUN QM-2301W Elliptical Training Machine.

Step 1

Screw the No. 02 lower riser assembly in the direction of the shear head, as shown in Figure 1.

[Diagram showing the lower riser assembly being attached.]

Step 2

Pass the No. 26 semi-circular head hexagon screw (M8*85) through the assembly. Use No. 16 and 17 flat washers (Φ8.2*16*1.5) and an anti-loosening nut (M8) to secure it. Then, use the No. 24 semi-circular head hexagon screw (M10*16) along with No. 21 spring washers (Φ10) and No. 25 arc washers (Φ10.2*Φ20*1.5) to lock the lower riser assembly and the main frame. Refer to Figure 2.

[Diagram showing the connection of the lower riser assembly to the main frame using specified hardware.]

Step 3

Pass the No. 27 semi-circular head hexagon screw (M10*70) through No. 28 flat washers (Φ10.2*20*1.5) and use the No. 29 anti-loosening nut (M10) to lock. Repeat this process on both sides, as shown in Figure 3.

[Diagram illustrating the attachment of components using M10*70 screws and M10 nuts.]

Step 4

Install the concave surface of the No. 39 foot cover onto the front foot tube. Remove the No. 38 packaging foot tube. Use two No. 10 carriage screws (M8*75) and No. 11 arc gasket (Φ8.2*20) to fix the No. 39 foot cover. Then, attach the No. 01 main frame assembly and the No. 08 front leg pipe assembly together, as shown in Figure 4.

[Diagram showing the attachment of the front foot cover and connecting the main frame with the front leg pipe.]

Step 5

Install the concave surface of the No. 39 foot cover onto the rear foot tube. Remove the No. 38 packaging foot tube. Use two No. 10 carriage screws (M8*75) and No. 11 arc-shaped gaskets (8.2*Φ20) to fix the No. 01 main frame assembly and the No. 09 rear foot tube assembly together, as shown in Figure 5.

[Diagram showing the attachment of the rear foot cover and connecting the main frame with the rear foot tube.]

Step 6

Use the No. 15 pedal assembly. Attach the No. 35 left pedal and No. 36 right pedal respectively. Then, attach the No. 18 left pedal and No. 13 right pedal onto the pedal assembly. Use the No. 14 hexagon screw (M8*45) to pass through, and secure with No. 16 and 17 flat washers (Φ8.2*16*1.5) and the M8 nut. Refer to Figure 6.

[Diagram illustrating the assembly of pedals onto the pedal assembly using specified hardware.]

Step 7

Use the No. 30 bracket connecting pin to attach the No. 05 mobile phone bracket and the No. 03 upper riser assembly, as shown in Figure 7.

[Diagram showing the connection of the mobile phone bracket to the upper riser assembly.]

Step 8

Tighten the No. 07 small handle and the No. 03 upper riser assembly using No. 24 hexagon socket head screws (M10*16), No. 21 spring washers (Φ10), and No. 25 arc washers (Φ10.2*Φ20*1.5), as shown in Figure 8.

[Diagram illustrating the attachment of the small handle to the upper riser assembly.]

Step 9

Place the No. 34 battery into the No. 33 electronic meter (Figure 9.1). Connect the induction wire of the upper riser assembly to the electronic meter wire and place it into the upper riser assembly (Figure 9.2).

[Diagrams showing battery insertion and wire connection for the electronic meter.]

Step 10

Connect the induction wire in the main frame to the upper riser wire. Then, use the No. 22 cylindrical head screw (M8*16) and No. 16 flat washer (Φ8.2*16*1.5) to lock it, as shown in Figure 10.

[Diagram illustrating the connection of the main frame induction wire to the upper riser wire.]

Step 11

Insert the No. 04 left and No. 06 right handlebars into the lower riser assembly. Tighten them with No. 23 carriage screws (M8*40) and No. 11 and 17 arc washers/anti-loosening nuts, as shown in Figure 11.

[Diagram showing the installation of handlebars.]

Step 12

Take out the No. 19 rocker cover. Disassemble and install it on the left and right armrests using No. 20 cross self-drilling screws (ST4.8*16) to lock, as shown in Figure 12.

[Diagram showing the installation of the rocker cover.]

Step 13

After assembling, adjust the foot cover to ensure it is flat front and back. Adjust the speed regulator to the desired resistance. After all parts are assembled, check all screws in each part to ensure they are tightened before use, as shown in Figure 13.

[Diagram showing final adjustments, including the adjusting wheel.]

Display Function

The electronic meter displays various training data. Ensure the battery is installed and the meter is properly locked with connected wires for operation.

• When not in use, the display will be blank. Start pedaling to activate it, and it will show time, mileage, count, total count, and calories.
• The display automatically starts in Scan mode, indicated by a flashing SCAN icon.
• Press the display button to cycle through each display function. This function remains active during the training session. Press the button again to cycle through functions.
• To reset the display, press and hold the display button until the screen is fully displayed, then release. The display functions will reset to zero.

Display Data Explained:

• SCAN: Automatically scans or rotates through each training data reading (time, speed, distance, calories, total mileage). The SCAN icon will be lit and flashing when this function is active.
• TIME: Shows the duration of your training.
• SPD (Speed): Shows your speed while training.
• DST (Distance): Shows the distance you have traveled in a single exercise during training.
• CAL (Calories): Shows the calories burned during training. The calorie count is based on average body weight and is an estimate; it should not be used for medical purposes.
• ODO (Total Mileage): Displays the total mileage you have exercised during training.
• RPM (Cadence): Displays real-time cadence data while riding, indicating how many times you pedal per minute.

Notes

This section is for user notes.

[Blank space for notes, represented by lines in the original PDF.]

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.