Introduction to the ValkPro+ L10° East-West System
This installation manual provides essential guidance for the Van der Valk ValkPro+ L10° East-West solar mounting system. It covers general installation guidelines, safety precautions, standards, and specific placement conditions to ensure a secure and efficient setup for solar panel arrays.
Key Installation Aspects
- General Guidelines: Adherence to safety precautions and instructions is mandatory for warranty validity.
- Standards and Regulations: The installation must comply with relevant European (EN) and International (IEC) standards for structural design, loads, electrical installations, and lightning protection.
- Roof Conditions: Detailed checks are required for roof pitch, stability, condition, and suitability for the mounting system's loads and thermal expansion.
- Environmental Factors: Consideration of wind pressure, seismic activity, and coastal proximity is crucial for system integrity.
- System Components: The manual lists basic and optional components, including roof carrier profiles, feet, ballast carriers, and connectors, along with their part numbers.
- Tools: A list of required tools such as cordless drills, sockets, wrenches, and measuring tapes is provided.
System Features
The ValkPro+ L10° East-West system is designed for efficient solar energy installations. The manual details aspects like cable management, disassembly for recycling, and specific considerations for different roof types and panel dimensions.
For detailed project-specific requirements and calculations, users are directed to the "Project report" generated by the ValkPVplanner.
