Uncompressed 4K HDBaseT Extender with eARC, KVM, PoH and Ethernet
Part: EVEXHDB3
Key Feature
Supports Enhanced Audio Return Channel (eARC) and Audio Return Channel (ARC)
Diagram illustrating the Vanco EVEXHDB3 HDBaseT 3.0 extender setup. It shows a Transmitter connected to an AVR/Amplifier and a Network via Cat6/6a cables. The Receiver is connected to an HDTV via HDMI and also has connections for LAN and SPDIF (built-in ARC back-up plan). The diagram highlights the eARC/ARC signals and the Cat6/6a cabling between the transmitter and receiver.
The Evolution by Vanco EVEXHDB3 HDBaseT 3.0 extender offers multiple options for pass-through control, and audio including eARC and ARC, along with PoH while being able to extend uncompressed 4K with HDR up to 164ft/50m over a single Cat6 or up to 328ft/100m using Cat6a/7.
- Allows HDMI audio/video signals to be transmitted using a single Cat6/6A/7 Cable HDMI 2.0b, HDCP 2.3/1.4 and HDBaseT 3.0 compliant.
- Extends uncompressed 4K@60Hz, 4:4:4, 18Gbps and HDR up to 328ft/100m.
- Transmission distance up to 328ft/100m via a single CAT6a/7 cable, or 164ft/50m using a single Cat6 cable.
- HDR compatible: passes HDR10, HDR10+, Dolby Vision and HLG formats.
- Supports multiple audio formats such as LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, and more.
- Able to embed audio from a separate audio source, or de-embed to break out or extract audio.
- Bi-directional IR, RS-232 and 1Gb Ethernet signal pass through.
- Extends and supports USB 2.0 functions such as mouse, keyboard, and touch screen control, as well as data, microphone and webcams.
- HDMI loop-out for local monitoring, use with other HDMI distribution products, or for de-embedding audio from the source or display end.
- Features Power over HDBaseT technology (PoH) which transmits power over Cat6/6a/7, allowing for either Transmitter or Receiver to be powered without the use of a power supply.
- Dimensions: 6.7" W x 4" D x 0.9" H (170mm W x 102mm D x 22mm H).
*NOTE – All specifications and ratings for the EVEXHDB3 have been tested and confirmed using Cat6 and Cat6a cabling. Cat5e is not recommended. Learn more at www.vanco1.com.
