GoodWe Suncake Series: Portable Energy for Wherever You Are
The Suncake Balcony Solar System is a plug-and-play portable power generation kit. With lightweight PV panels, a microinverter, straps, and cables, you can easily generate your own electricity and use it anywhere. Simply attach the solar modules to the railing and plug them into an electrical outlet to start generating power. Moreover, it is entirely portable; you can unplug it, move it, and reconnect it as needed. Whether on an apartment balcony, in a courtyard, on a terrace, exterior walls, balcony railings, fences, or even outdoor tables, this system allows you to use electricity easily anytime, anywhere.
Reasons to Choose Us
Lightweight & Stylish
- 3.5 kg/m² lightweight solar panel
- Sleek matte black, anti-glare design
- Compact 21 kg system fitting easily in a car trunk
DIY Setup in No Time
- Plug-and-play easy installation
- Solo install up to 75% efficiency boost
- No tools, no extra labor required
Reliable One-Stop Solution
- All-in-one package, 50% lower shipping costs
- Durable full die-cast aluminum microinverter
- Rapid discharge for enhanced safety
Carry & Go
- Portable, easy to carry with one hand
- Versatile for urban living and outdoor use
- Glass fence adaptable
Suncake Portable Solar Kit
PV Panel
A description of the PV panel: The panel is part of the Suncake Series, model BMM-T1/054A. It features N-type Topcon Half Cells (54 pcs) and has dimensions of 1147±2*919±2*17±1mm, weighing 3.5±0.5kg. The connector type is MC4-EVO2 (Stäubli). Electrical data at STC includes a power of 205W, power density of 194W/m², voltage at max power (Vmpp) of 16.60V, voltage at open circuit (Voc) of 20.31V, current at max power (Impp) of 12.35A, and current at short circuit (Isc) of 12.65A. Operational conditions include a max front side static load of 2400Pa and max rear side static load of 2400Pa. The maximum system voltage is 1500V, with a maximum fuse rating operation of 25A. The temperature range is -40°C to +85°C, with a rated operating temperature of 45±2°C. It has a fire-resistant class of C and an ingress protection rating of IP67, with protection class I. Temperature parameters include Isc TP of +0.03%/°C, Voc TP of -0.27%/°C, and Pmpp TP of -0.30%/°C.
Microinverter
A description of the microinverter: The microinverter is model GW0.8K-MIS-G10. It has dimensions of 256*287*34.5mm and weighs 3.4kg. It supports a commonly used module power range of 200-600W and has a nominal output power of 800W. The MPPT range is 13-60V, with a maximum input current per MPPT of 18A. Its maximum efficiency is 96.40%. The operating temperature range is -40°C to +65°C (with < 45°C no load shedding), and the noise level is < 22dB. Communication is via WiFi / Bluetooth. The topology uses a Galvanically Isolated HF Transformer. It has 2 MPP trackers and 1 input string per tracker. PV string current monitoring and anti-islanding protection are integrated. It also features an integrated AC surge arrester. Compliance includes IEC 62109, VDE 4105:2018, ETSI/EN 303645, EN 18031, IEC 61000, EN 300328, EN 301489, EN IEC 62311, IEC 62920, and EN 62479.
System Solution
| System Capacity | Panel unit | Straps | Microinverter | Microinverter Accessory | DC Cable | AC Cable |
|---|---|---|---|---|---|---|
| 820W | 4pcs | 40pcs | 800W | 1pc | 4pcs | 1pc |
