NXP Semiconductors i.MX RT1180 Crossover Processors Data Sheet

Introduction to the i.MX RT1180

The i.MX RT1180 is a high-performance processor from NXP Semiconductors, designed for demanding applications. It features a powerful Arm Cortex-M7 core operating at up to 800 MHz and an energy-efficient Arm Cortex-M33 core at up to 300 MHz. This processor family is ideal for industrial automation, building automation, energy management, and Internet of Things (IoT) applications.

Key features include industrial gateway capabilities with support for real-time protocols like Profinet, EtherCAT, and EtherNet/IP, along with TSN-based protocols. It boasts an advanced Ethernet switch subsystem and a substantial 1.5 MB on-chip RAM with ECC protection. The i.MX RT1180 also integrates an advanced power management module and a comprehensive set of connectivity interfaces, enhancing its versatility for various hardware designs.

For detailed functional characteristics and programming models, refer to the i.MX RT1180 Reference Manual.

PDF preview unavailable. Download the PDF instead.

IMXRT1180EC AH XSL Formatter V7.1 MR4 for Linux64 : 7.1.5.52097 (2021-08-03T13:31 09) Antenna House PDF Output Library 7.1.1688

Related Documents

Preview i.MX RT1160 Crossover Processors Data Sheet for Industrial Products
NXP Semiconductors presents the i.MX RT1160 Crossover Processors Data Sheet, detailing a new high-end processor with dual Arm Cortex cores, advanced power management, and a wide array of interfaces for industrial applications.
Preview i.MX RT1170 Crossover Processors Data Sheet for Industrial Products
This document provides comprehensive technical data for the NXP i.MX RT1170 Crossover Processors, detailing features, architecture, modules, electrical characteristics, and ordering information for industrial applications.
Preview NXP i.MX 95 Family of Applications Processors Evaluation Kit Quick Start Guide
A quick start guide for the NXP i.MX 95 Evaluation Kit (EVK), detailing setup and development with the i.MX 95 applications processor and associated accessories. It covers specifications, getting started steps, system setup, and additional information.
Preview NXP AN14716: Migration Guide from i.MX RT1170A to i.MX RT1170B
This application note provides a comprehensive migration guide for users transitioning from the i.MX RT1170A to the i.MX RT1170B. It details silicon changes, datasheet updates, reference manual modifications, errata corrections, SDK changes, and tool updates necessary for a smooth migration. Key differences in part numbers, electrical specifications, and timing parameters are highlighted to assist engineers in adapting their projects.
Preview NXP i.MX RT1170 Crossover MCU Family Fact Sheet
Fact sheet detailing the NXP i.MX RT1170 Crossover MCU family, highlighting its high performance, real-time capabilities, low power consumption, and integration features for applications like edge computing, industrial control, and IoT.
Preview Migrating from i.MX RT1060 to i.MX RT1170: A Guide
This guide provides a comprehensive comparison of the i.MX RT1170 and i.MX RT1060 processors, detailing key differences in system integration, package, pin multiplexing, power supply, clocking, power modes, DMA, memory maps, ECC, graphics and display interfaces, audio peripherals, low-speed peripherals, EMVSIM, watchdog timers, analog peripherals, boot process, security features, and software considerations. It is intended for engineers and researchers familiar with the i.MX RT1060 who are migrating projects or developing new ones with the i.MX RT1170.
Preview NXP MIMXRT1180-EVK Quick Start Guide
A quick start guide for the NXP MIMXRT1180-EVK evaluation kit, detailing board components and initial setup.
Preview NXP i.MX Linux Release Notes LF5.15.71_2.2.2
NXP i.MX Linux Release Notes LF5.15.71_2.2.2 provides comprehensive details on the latest embedded Linux distribution for NXP's i.MX processors. It covers supported features, new additions, known issues, and multimedia specifications for i.MX 6, 7, 8, and 9 series.