Assembly Instructions
BAILEY CHEST OF DRAWERS
Model Numbers: 43560387 / 43566105
Important Warnings and Care Instructions
WARNING:
- DO NOT STAND, SIT OR LEAN ON THIS UNIT.
- DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE.
- KEEP AWAY FROM CHILDREN AND BABIES.
- ADULT ASSEMBLY REQUIRED.
- USE ONLY ON A FLAT SURFACE.
- DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED.
CARE INSTRUCTIONS:
- TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE.
- WIPE CLEAN WITH A SOFT DAMP CLOTH.
- NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS.
- CHECK AND TIGHTEN ALL PARTS REGULARLY.
- KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT.
- STORE IN A DRY PLACE.
- FOR INDOOR AND DOMESTIC USE ONLY.
MAXIMUM SAFE LOAD: 15KG FOR TOP PANEL, 7KG FOR EACH DRAWER.
Hardware List
| Item | Description | Quantity |
|---|---|---|
| A | M6x35mm | 29pcs |
| B | Ø15x9mm | 29pcs |
| C | Ø6x30mm | 22pcs |
| D | M4x35mm | 22pcs |
| E | M4x40mm | 2pcs |
| F | M7x40mm | 5pcs |
| G | [Hardware G] | 1pcs |
| H | M3x16mm | 8pcs |
| I | [Hardware I] | 2pcs |
| J | [Hardware J] | 2pcs |
| K | [Hardware K] | 2pcs |
| L | M3x12mm | 42pcs |
| M | Ø8x30mm | 5pcs |
| N | [Hardware N] | 5pcs |
| CL | [Hardware CL] | 3pcs |
| CR | [Hardware CR] | 3pcs |
| DL | [Hardware DL] | 3pcs |
| DR | [Hardware DR] | 3pcs |
Parts Identification
The following parts are used in the assembly:
- Part 1: 1PC
- Part 2: 1PC
- Part 3: 1PC
- Part 4: 1PC
- Part 5: 1PC
- Part 6: 2PCS
- Part 7: 1PC
- Part 8: 2PCS
- Part 9: 5PCS
- Part 10: 3PCS
- Part 11: 3PCS
- Part 12: 3PCS
- Part 13: 3PCS
- Part 14: 3PCS
- Part 15: 3PCS
Assembly Steps
Important Note: Do not tighten the screws fully during assembly. Fully tighten screws after the final assembly steps.
Step 1:
Prepare side panels. Attach part 3 to part 4 using screws CL (x3) and L (x24). Attach part 7 to part 3 using screws CR (x3). Attach part 6 to part 3 using screws CR (x3). Attach part 7 to part 4 using screws CL (x3). Attach part 6 to part 4 using screws CL (x3). The diagram shows multiple L screws being used, and CL/CR screws connecting panels.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 2:
Attach part 3 and part 4 to the base panel (part 1) using screws A (x10). The diagram shows two side panels (3 and 4) being attached to a base panel (1).
Tool Required: Philips Head Screw Driver (Not Provided)
Step 3:
Assemble the frame. Attach part 5 to part 3 and part 4 using screws B (x5). Attach part 7 to part 3 and part 4 using screws C (x2). The diagram shows vertical supports being attached to the base assembly.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 4:
Continue frame assembly. Attach part 4 to the base assembly using screws B (x5) and C (x2). The diagram shows the second side panel (4) being attached to the base and vertical supports.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 5:
Attach the top panel (part 1) to the assembled frame using screws A (x4). The diagram shows the top panel being placed and secured.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 6:
Slide part 8 into the back of the unit. The diagram shows a panel (8) being inserted into grooves at the rear.
Step 7:
Attach the drawer runners. Attach part 1 to the side panels using screws B (x4) and C (x6). Attach part E (x2) to the side panels. The diagram shows drawer runners being attached to the interior of the main unit's side panels.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 8:
Assemble the drawer bases. Attach part 2 to part 9 using screws F (x5). Attach part 9 to part 2 using screw G (x1). Attach part 9 to part 2 using screws M (x5). The diagram shows drawer base components being assembled.
Step 9:
Continue drawer assembly. The diagram shows the main frame with part 8 inserted at the back.
Step 10:
Attach drawer sides. Attach part 2 to the main frame using screws C (x4) and D (x4). Attach part 11 to the frame using screws N (x5). The diagram shows drawer sides being attached to the main unit.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 11:
Assemble drawer fronts. Attach part 10 to the drawer sides using screws H (x8). Attach part 1 to the drawer sides using screws I (x1). Attach part 10 to the drawer sides using screws J (x2). The diagram shows drawer fronts being attached to drawer side panels.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 12:
Assemble drawer runners. Attach part 11 and part 13 to the drawer sides using screws D (x18). Attach part 12 and part 14 to the drawer sides using screws D (x18). The diagram shows drawer runners being attached to the drawer boxes. This step is repeated x3 for three drawers.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 13:
Insert drawer bases. Slide part 15 into the assembled drawer boxes. This step is repeated x3.
Step 14:
Attach drawer fronts. Attach part 10 to the drawer sides using screws A (x15). This step is repeated x3.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 15:
Assemble drawer sides and fronts. Attach part 10 to the drawer sides using screws B (x15) and C (x9). The diagram shows drawer box assembly.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 16:
Attach drawer runners to drawer sides. Attach part 10 to the drawer sides using screws L (x18). Attach part 13 to the drawer sides using screws DL (x3) and DR (x3). This step is repeated x3.
Tool Required: Philips Head Screw Driver (Not Provided)
Step 17:
Insert drawers into the unit. The diagram shows the completed drawers being slid into the main chest frame.
Step 18:
Secure the unit to the wall. Attach part K (x2) to the top of the unit and the wall using appropriate fixings. The diagram shows anti-tip hardware being attached.
Tool Required: Philips Head Screw Driver (Not Provided)
Furniture Toppling Warning and Safety
WARNING:
- ALWAYS secure it with an anchor device.
- Please seek professional advice if you are in doubt of what fixing device to use.
- Regularly check that anchors are securely maintained.
- Use safety drawer locks to prevent children climbing.
- Stability of tall items may be affected by thick pile carpet or uneven floors.
- Do not place unanchored televisions on furniture.
CAUTION: For your safety when attaching the anchor fixings, please note the following:
- Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure please seek professional advice from a qualified tradesperson).
WARNING: PLEASE SECURE YOUR FURNITURE WITH THE SUPPLIED WALL FIXING. SCAN THE CODE FOR MORE INFORMATION.
Note: The QR code itself is excluded as per instructions.
This is a permanent label. Do not remove!
