Solar LED Light String

Specifications

• Solar panel size: 126x126mm
• Solar panel power: 1.5W (DC 6V)
• Battery (lithium): 3.7V 2000mAh
• Working voltage / current: DC 3V / 240mA
• IP44 rated (dust and splash resistant)

Safety Warnings and Environmental Considerations

• Before installation, please read the specifications to ensure this product is suitable for the operating environment.
• Make sure the supply voltage is the same as the rated lamp voltage.
• All safety instructions must be followed to avoid a risk of injury or property damage.
• Suitable for outdoor use.
• Do not attach other items to the product. Only use the product when it is working perfectly. Store and install the product out of the reach of children.
• Keep away from flammable materials.
• The cable cannot be replaced; avoid damage to insulation during installation.
• Keep the battery away from sources of heat and fire, otherwise it may explode.
• Do not insert other bulbs than those supplied with this product.
• Do not connect the light string to another power supply.
• Electrical products must not be disposed of with normal household waste. Take the fixture to a recycling facility.
• Turn off the solar light when not in use to preserve the rechargeable battery.
• Ensure the solar panel is always clean. Dust and dirt will reduce efficiency. Use only a damp cloth and a small amount of detergent.

Solar Powered Operation

How it Works

• During the day, the solar panel converts sunlight into electricity and recharges the battery. At night, it uses the electricity stored during that day.

Factors Affecting Performance

• The burning time of a solar lamp depends on the amount of (sun) light, which is affected by geographical location, weather conditions, and seasonal sunlight.
• Place the solar panel in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the batteries to charge fully and will reduce the hours of nighttime lighting.
• The selected location should not be near nighttime light sources, as these may cause the solar light to turn off prematurely.

Charging and Burning Times

• Charging time: 4-6 hours (at 40,000 lux).
• Burning time: 6-24 hours after fully charged (at 25%/50%/100% brightness).

Installation and Mounting

Solar Panel Installation

• Option 1: Install the solar panel into the lawn using the provided post and spike.
• Option 2: Attach the solar panel to a wall or tree trunk using screws.

Connecting the Light String

Connect the light string cable to the solar panel.

Button Operation

• To turn the unit ON/OFF or select modes, long press the button for 3 seconds.
• To select brightness (100%/50%/25%), shortly press the button again.

Automatic Operation

• The light will turn on automatically at night.
• The light turns off automatically for charging during the daytime.

Diagram description: The diagram illustrates connecting the light string to the solar panel. It also shows two mounting options for the solar panel: inserting a post with a spike into the ground for lawn installation, or attaching it to a wall or tree trunk using screws.

Additional Charging Options

Indicator Light

An indication light appears for 10 seconds after a short press on the button, providing status feedback.

USB Charging

This solar LED light string can also be charged using a USB connection.

Diagram description: The diagram shows the rear of the solar panel, highlighting the ON/OFF button, a USB port for charging, and the indicator light.