Foxeer Razer Mini & Micro FPV Camera
Important Safety Information
Warning
Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property, and cause serious injury.
Age Recommendation
Not for children under 14 years. This is not a toy.
Notice
This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. FOXEER disclaims all liability outside of the intended purpose and will not provide warranty service related thereto.
Support
Visit www.foxeer.com to get more information.
Camera Connections
Camera-Video Transmitter Connection
To connect the camera directly to the video transmitter, plug the 3-pin wiring harness from the video transmitter into the camera. Alternatively, you can power the camera by other devices such as a PDB, FC, or battery.
Camera-OSD Switch Connection
The OSD switch board connects to the camera via a 5-pin harness. The harness includes the following connections:
- VCC: Power input (DC 4.5-25V), typically Red wire.
- GND: Ground wire, typically Black wire.
- VID: Video output signal, typically Yellow wire.
- OSD: OSD signal, typically White wire.
A separate 3-pin harness connects to the video transmitter, and a 2-pin harness connects to the OSD switch board.
Caution: If you are using ESCs with active braking, it is recommended to power the camera system through a BEC or voltage regulator.
Main Menu Navigation
Menu Controls
- [MENU]: Push the center button to go to the main menu.
- [UP]/[DOWN]: Move up and down through the menu options.
- [LEFT]/[RIGHT]: Modify the menu parameters.
Main Menu Options
The main menu includes the following options:
- AE (Auto Exposure)
- AWB (Auto White Balance)
- DAY/NIGHT
- IMAGE ENHANCE
- VIDEO SETTING
- LANGUAGE
- RESET
- SAVE&EXIT
- EXIT
Camera Settings
AE (Auto Exposure)
Auto Exposure automatically adjusts the lens aperture and shutter speed of the camera. This is controlled by a mechanism that aims to achieve a desired brightness level for captured video or images, ensuring they are neither too dark nor too bright. This is achieved by adjusting the lens aperture, sensor exposure time, sensor analog gain, and sensor/ISP digital gain.
Brightness
Adjustable from 1 to 100. A higher value results in a brighter image.
Exposure Mode
Options include:
- BLC (Back Light Compensation): Adjustable from 0 to 7.
- FLC (Front Light Compensation)
- GLOBAL
- CENTER
AWB (Auto White Balance)
Auto White Balance adjusts the color temperature to ensure accurate color reproduction under different lighting conditions.
Mode
- ATW (Auto Tracing White Balance): Automatically adjusts white balance.
- MWB (Manual White Balance): Allows manual adjustment of white balance using RGAIN (Red Gain) and BGAIN (Blue Gain) values, each from 0 to 63.
Gray Global
This setting might be related to overall color balance or specific gray level adjustments.
Day/Night
The Day & Night switch is designed for different occasions and offers four modes:
- MODE: EXT (external control), AUTO, COLOR, BW (black and white).
Image Enhance
These settings allow fine-tuning of the image quality:
- Contrast: AUTO / MANUAL (0-20)
- Sharpness: AUTO / MANUAL (0-20)
- Saturate: AUTO / MANUAL (0-20)
- 3DNR (3D Noise Reduction): AUTO / MANUAL (0-20)
- 2DNR (2D Noise Reduction): AUTO / MANUAL (0-20)
Video Setting
Configure video output parameters:
- HD: CVBS
- Standard: PAL / NTSC switchable
Language
The camera supports multiple languages, including: ENGLISH, Chinese (中文, 繁体), PYCCKNN, ESPANOL, FRANCAIS, POLSKI, ITALIANO, PORTUGUES, Japanese (日本語), Korean (한국어), EAAHNIKA.
Functions
Reset
Resets all camera settings to their factory defaults.
Save & Exit
Saves the current settings and exits the menu.
Exit
Exits the menu without saving any changes.
