FOXEER Toothless Series FPV Cameras

CAMERA-VIDEO TRANSMITTER CONNECTION

To connect the camera directly to the video transmitter, plug the 3-pin wiring harness from the video transmitter into the camera. Alternatively, you can power the camera using other devices such as a PDB (Power Distribution Board), FC (Flight Controller), or battery pack.

Diagram Description:

The diagram shows a "Nano Camera Back" labeled "Toothless FULL WEATHER CAM Made in China" with a 3-pin connector (VBAT+, GND, VID, OSD). This connects to a "2 Pin To OSD Switch board" labeled "OSD Switch Front". A "4 Pin Harness" is detailed with its pinout: VCC (DC 3.8-16V, Red wire), GND (Ground Wire, Black wire), VID (Video out, Yellow wire), and OSD (OSD, White wire).

CAMERA-OSD SWITCH CONNECTION

Diagram Description:

This section illustrates the connection between the "Mini/Micro Camera Back" (Toothless FULL WEATHER CAM) and the "OSD Switch Front" (2 Pin To OSD Switch board). The camera has a 3-pin connector (VBAT+, VSEN). The OSD switch board connects via a "5 Pin Harness" with the following pinout: VCC (DC 4.6-20V, Red wire), GND (Ground Wire, Black wire), VID (Video out, Yellow wire), VSEN (Voltage Sensor, Blue wire), and OSD (OSD, White wire).

Note: Connect the VSEN cable wherever you want to detect the voltage.

CAUTION: If you are using ESCs (Electronic Speed Controllers) with active braking, we recommend powering the camera system through a BEC (Battery Eliminator Circuit) or a voltage regulator.

Main MENU Navigation

Navigate the camera's settings using the following controls:

• MENU: Push the MENU (center button) to go to the main menu.
• UP/DOWN: Move up and down through the menu options.
• Left/Right: Modify the menu parameters.

Menu Structure:

WB (White Balance)

It is generally recommended not to change the White Balance settings.

MODE: ATW / MWB (Manual White Balance).

MWB Settings:

• RGAIN: Range 0~32
• BGAIN: Range 0~32

Current Menu View Example:

DAY NIGHT

MODE: EXT (External) / AUTO / COLOR / BW (Black and White).

Current Menu View Example:

IMAGE ENHANCE

Adjust image characteristics for optimal viewing.

• CONTRAST: AUTO/MANUAL (Range: 0~40)
• SHARPNESS: AUTO/MANUAL (Range: 0~16)
• COLOR GAIN: AUTO/MANUAL (Range: 0~30)
• 3DNR: AUTO/MANUAL (Range: 0~30)

Current Menu View Example:

VIDEO SETTING

• VIDEO STANDARD: PAL/NTSC
• D-WDR: OPEN/CLOSE

Current Menu View Example:

SPECIAL SETTING

• VIDEO SCALE: 4:3 WIDE / 4:3 NARROW / 16:9
• NAME: OPEN/CLOSE
• VOLTAGE: OPEN/CLOSE
• TIMER: OPEN/CLOSE

Current Menu View Example (PTZ MENU):

LANGUAGE

Select the display language for the camera's menu and OSD.

Available Languages: ENGLISH, 中文 (Chinese), PYCCKNN (Russian - assumed), ESPANOL (Spanish), ITALIANO (Italian), FRANCAIS (French), POLSKIM (Polish), PORTUGUES (Portuguese), 日本語 (Japanese), EAAHNIKA (Greek).

RESET

RESET: Return the camera to its initial factory settings.

AE (Auto Exposure)

Configure automatic exposure settings.

1. BRIGHTNESS: Range 0~30.
2. EXPOSURE MODE:
   • GLOBE (Global)
   • FLC (Front Light Control): Range 1~8
   • BLC (Back Light Control): Range 1~8
3. ADVANCED: SHUTTER CTRL / GAIN CTRL.
   • SHUTTER CTRL:
     • AUTO
     • MANUAL: PAL (1/25~1/10000) / NTSC (1/30~1/10000)
   • GAIN CTRL:
     • AUTO
     • MANUAL: ANALOG GAIN (1~16) / DIGITAL GAIN (1~15)

Current Menu View Example (EXPOSURE):

Current Menu View Example (AE ADVANCED):