BUREAU VERITAS
Certificate of Compliance
Applicant Information
Company: NingBo Deye Inverter Technology Co., Ltd.
Address: No. 26 South YongJiang Road, Daqi, Beilun, NingBo, China
Product Details
Product Type: Photovoltaic (PV) and battery inverter
Models:
- SUN-3K-SG04LP1-EU
- SUN-3K-SG04LP1-24-EU
- SUN-3.6K-SG04LP1-EU
- SUN-5K-SG04LP1-EU
- SUN-6K-SG04LP1-EU
- SUN-3K-SG04LP1-24-EU-SM1
- SUN-3K-SG04LP1-EU-SM1
- SUN-3.6K-SG04LP1-EU-SM2
- SUN-5K-SG04LP1-EU-SM2
- SUN-6K-SG04LP1-EU-SM2
Description: Inverter for single-phase parallel connection to the public grid. The network monitoring and disconnection device is an integral part of the above-mentioned models.
Applied Rules and Standards
- EN 50549-1:2019-02, NBN EN 50549-1:2019-02: Requirements for parallel connection of installations with distribution networks - Part 1: Connection to an LV distribution network - Production of installations up to and including Type B
- Specific requirements:
- 4.4 Normal operating range
- 4.5 Immunity to disturbances
- 4.6 Active response to frequency deviation
- 4.7 Power response to voltage variations and voltage changes
- 4.8 EMC and power quality
- 4.9 Interface protection
- 4.10 Connection and starting to generate electrical power
- 4.11 Ceasing and reduction of active power on set point
- 4.13 Requirements regarding single fault tolerance of interface protection system and interface switch
- C10/11:2021-03: Specific technical requirements for generator in parallel operation with the distribution network
- Commission Regulation (EU) 2016/631 of 14 April 2016: Establishing a network code on requirements for grid connection of generators (NC RFG).
- Type approval for generation units to use in Type A plants.
Certification Details
Report Number: ASUE-ESH-P22010039-R1
Certificate Number: U23-1079
Certification Program: NSOP-0032-DEU-ZE-V01
Date of Issue: 2023-11-28
Certification Body
Issuing Body: Bureau Veritas Consumer Products Services Germany GmbH
Accredited according to DIN EN ISO/IEC 17065
Testing laboratory accredited according to DIN EN ISO/IEC 17025
A partial representation of the certificate requires the written permission of Bureau Veritas Consumer Products Services Germany GmbH.
Technical Specifications Appendix
Extract from test report according to EN 50549-1 / C10/11
Report Number: ASUE-ESH-P22010039-R1
Type Approval and declaration of compliance with the requirements of EN 50549-1, Commission Regulation (EU) 2016/631 of 14 April 2016 and C10/11 for Belgium
Manufacturer / applicant: NingBo Deye Inverter Technology Co., Ltd., No. 26 South YongJiang Road, Daqi, Beilun, NingBo, China
Micro-generator Type: Photovoltaic and battery inverter
| Micro-generator Type | SUN-3K-SG04LP1-EU Series | SUN-3K-SG04LP1-EU-SM1 Series | SUN-3.6K-SG04LP1-EU-SM2 Series | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPP DC voltage range [V] | Input DC voltage range [V] | Input DC current [A] | Output AC voltage [V] | Output AC current [A] | Output power [W] | Battery DC voltage range [V] | Battery charge current [A] | Battery discharge current [A] | MPP DC voltage range [V] | Input DC current [A] | Output AC voltage [V] | Output AC current [A] | Output power [W] | Battery DC voltage range [V] | Battery charge current [A] | Battery discharge current [A] | MPP DC voltage range [V] | Input DC current [A] | Output AC voltage [V] | Output AC current [A] | Output power [W] | Battery DC voltage range [V] | Battery charge current [A] | Battery discharge current [A] | |
| SUN-3K-SG04LP1-EU | 150-425 | 370 (125-500) | 13 | L/N/PE 230, 50/60Hz | 13,0 | 3000 | 48 (40-60) | 70 | 70 | 150-425 | 13/13 | L/N/PE 230, 50/60Hz | 13,1 | 3000 | 48(40-60) | 70 | 70 | 150-425 | 18/18 | L/N/PE 230, 50/60Hz | 15,7 | 3600 | 48(40-60) | 90 | 90 |
| SUN-3K-SG04LP1-24-EU | 150-425 | 370 (125-500) | 13 | L/N/PE 230, 50/60Hz | 13,0 | 3000 | 24 (20-30) | 140 | 140 | 150-425 | 13/13 | L/N/PE 230, 50/60Hz | 13,1 | 3000 | 24(20-30) | 140 | 140 | -- | -- | -- | -- | -- | -- | -- | |
| SUN-3.6K-SG04LP1-EU | 150-425 | 370 (125-500) | 13 | L/N/PE 230, 50/60Hz | 15,7 | 3600 | 48 (40-60) | 90 | 90 | 150-425 | 18/18 | L/N/PE 230, 50/60Hz | 15,7 | 3600 | 48(40-60) | 90 | 90 | 150-425 | 18/18 | L/N/PE 230 50/60Hz | 21,8 | 5000 | 48(40-60) | 120 | 120 |
| SUN-5K-SG04LP1-EU | 150-425 | 370 (125-500) | 13 | L/N/PE 230, 50/60Hz | 21,7 | 5000 | 48 (40-60) | 120 | 120 | 150-425 | 18/18 | L/N/PE 230, 50/60Hz | 15,7 | 3600 | 48(40-60) | 90 | 90 | 150-425 | 18/18 | L/N/PE 230 50/60Hz | 26,1 | 6000 | 48(40-60) | 135 | 135 |
| SUN-6K-SG04LP1-EU | 150-425 | 370 (125-500) | 13 | L/N/PE 230, 50/60Hz | 21,7 | 5000 | 48 (40-60) | 120 | 120 | 150-425 | 18/18 | L/N/PE 230, 50/60Hz | 26,1 | 6000 | 48(40-60) | 135 | 135 | -- | -- | -- | -- | -- | -- | -- | |
| SUN-3K-SG04LP1-24-EU-SM1 | -- | -- | -- | -- | -- | -- | -- | -- | -- | 150-425 | 13/13 | L/N/PE 230, 50/60Hz | 13,1 | 3000 | 24(20-30) | 140 | 140 | -- | -- | -- | -- | -- | -- | -- | |
| SUN-3K-SG04LP1-EU-SM1 | -- | -- | -- | -- | -- | -- | -- | -- | -- | 150-425 | 18 | L/N/PE 230, 50/60Hz | 13,1 | 3000 | 48(40-60) | 70 | 70 | -- | -- | -- | -- | -- | -- | -- | |
| SUN-3.6K-SG04LP1-EU-SM2 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 150-425 | 18/18 | L/N/PE 230 50/60Hz | 15,7 | 3600 | 48(40-60) | 90 | 90 |
| SUN-5K-SG04LP1-EU-SM2 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 150-425 | 18/18 | L/N/PE 230 50/60Hz | 21,8 | 5000 | 48(40-60) | 120 | 120 |
| SUN-6K-SG04LP1-EU-SM2 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 150-425 | 18/18 | L/N/PE 230 50/60Hz | 26,1 | 6000 | 48(40-60) | 135 | 135 |
Firmware version: 4384
Description of the structure of the power generation unit
The power generation unit is equipped with a PV and line-side EMC filter. The power generation unit has no galvanic isolation between DC input and AC output. Output switch-off is performed with single-fault tolerance based on the inverter bridge and two series-connected relays in (each) line and neutral. This enables a safe disconnection of the power generation unit from the network in case of error.
Note: The settings of the interface protection are password protected adjustable. In case the above stated generators are used with an external protection device, the protection settings of the inverters are to be adjusted according to the manufacturer's declaration. The above stated generators are tested according to the requirements in the EN 50549-1:2019, Commission Regulation (EU) 2016/631 of 14 April 2016 and C10/11 for Belgium. Any modification that affects the stated tests must be named by the manufacturer/supplier of the product to ensure that the product meets all requirements.
