C-Lite C-FL-B-FLW Visor Accessory Installation Instructions

Brand: C-Lite

Model: C-FL-B-FLW-VISOR ACCESSORY

Important Safeguards

DANGER: Risk of electric shock. Disconnect power before installation.

When using electrical equipment, basic safety precautions should always be followed, including the following: Read and follow all safety instructions.

Save these instructions for future reference.

Hardware Included

For Small (2L and 6L Fixtures), Medium (9L and 14L Fixtures), and Large (20L and 26L Fixtures) Visor Accessories:

(x2) Split Washer
(x2) Flat Washer
(x2) Machine Screw

For Extra Large Visor Accessory (34L and 45L Fixtures):

(x3) Split Washer
(x3) Flat Washer
(x3) Machine Screw

Installation Steps

Assembly of Visor Accessory for 2L, 6L, 9L, 14L, 20L and 26L Fixtures

1. Place the visor above the LEDs, aligning the visor tabs over the threaded holes on the sides of the fixture. Assemble the factory-supplied hardware in the following sequence: split washer, flat washer, and screw. See Figure 1. Tighten the two screws to secure the visor.

Assembly of Visor Accessory for 34L and 45L Fixtures

1. Place the visor above the LEDs, aligning the visor tabs over the threaded holes on the sides and on the top of the fixture. Assemble the factory-supplied hardware in the following sequence: split washer, flat washer, and screw. See Figure 2 on the back page. Tighten the three screws to secure the visor.

Diagram Descriptions

Figure 1: Hardware Components

Figure 1 illustrates the hardware components used for visor attachment. It shows an #8 Split Washer, an #8 Flat Washer, and an #8 Machine Screw.

(Description of Figure 1: The diagram shows three hardware components: a split washer, a flat washer, and a machine screw, each labeled with "#8".)

Figure 2: Visor Attachment Process

Figure 2 visually demonstrates the process of attaching the visor accessory to the fixtures. It shows three stages of assembly for the visor attachment.

(Description of Figure 2: The diagram shows three steps for attaching the visor. The first step shows positioning the visor over the fixture. The second step shows inserting the hardware (split washer, flat washer, screw) into the threaded holes. The third step shows the secured visor. It also includes close-ups of the hardware components.)

FCC Notice

CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

CAN ICES-003 (A)/NMB-003 (A)

	C-LITE C-TR-C-BT-ACC-SMK Series Installation Instructions Comprehensive installation guide for the C-LITE C-TR-C-BT-ACC-SMK Series LED lighting fixture. This manual provides essential safety precautions and detailed, step-by-step instructions for mounting and wiring the fixture, ensuring proper installation.
	C-Lite C-VT-C-LIN4 Series LED Lighting Fixture Installation Instructions Comprehensive installation guide for the C-Lite C-VT-C-LIN4 Series linear vapor-tight LED lighting fixture, covering safety precautions, step-by-step installation, electrical connections for various voltage and dimming configurations, and FCC compliance information.
	C-Lite C-TR-C-BT LED Series Installation Instructions with Emergency Back-up Comprehensive installation guide for the C-Lite C-TR-C-BT LED Series luminaires, featuring emergency back-up. Includes essential safety warnings, detailed step-by-step installation procedures, electrical wiring diagrams (described textually), dimming setup, emergency driver testing, and FCC Class A compliance information. Suitable for commercial installations.
	C-LITE C-TR-B-BT LED Series Installation Instructions with Emergency Back-up Comprehensive installation guide for the C-LITE C-TR-B-BT LED Series fixtures, including important safety precautions, electrical wiring, dimming, and emergency driver checks. Learn how to properly install and maintain your C-LITE LED lighting.
	C-LITE C-AR-A-AL Series LED Area Light Installation Instructions Comprehensive installation guide for the C-LITE C-AR-A-AL Series LED Area Light, covering slip fitter, direct mount arm, and trunnion mounting methods, electrical connections, safety precautions, and FCC compliance.
	C-LITE C-CP-C-SQ Series LED Lighting Fixture Installation Guide Provides detailed installation instructions for the C-LITE C-CP-C-SQ Series LED lighting fixture, covering essential safety precautions, mounting procedures, electrical connections, dimming, and FCC compliance information.
	C-Lite C-WM-A-MWP Series Mini LED Wall Pack - Product Specifications and Features Detailed specifications, features, and ordering information for the C-Lite C-WM-A-MWP Series Mini LED Wall Pack, a versatile lighting solution with field-selectable CCT and photocell.