Raychem UMB Universal Mounting Bracket Installation Instructions
Brand: Raychem
Description
The Raychem Universal Mounting Bracket (UMB) is designed to securely mount various Raychem thermostats and compatible junction boxes. This guide provides instructions for selecting the correct mounting pattern and hardware for installation.
Tools Required
- Flatblade screwdriver
- Adjustable wrench
Kit Contents
| Item | Qty | Description |
|---|---|---|
| A | 1 | Raychem UMB bracket |
| B | 2 | Hex head bolt (1/4-20 x 1 in) |
| C | 2 | Hex head bolt (#10-32 x .375 in) |
| D | 2 | Pan head screw (#10-32 x 1.25 in) |
| E | 2 | Pan head screw (#10-32 x .625 in) |
| F | 2 | Hex Nut (1/4-20) |
| G | 2 | Hex Nut (#10-32) |
| H | 2 | Lock Washer (1/4) |
| I | 2 | Lock Washer (#10) |
| J | 2 | Flat Washer (#10) |
Additional Materials Required
- Pipe strap
Installation Steps
- Use Chart A to select the mounting pattern figure for installation.
- Mount the equipment according to the figure shown on page 2.
Chart A: Compatible Devices and Fasteners
| Device Type | Fasteners Quantity/Each | Mounting Pattern | ||
|---|---|---|---|---|
| 8-32 bolt, nut #8 lock-washer (supplied with thermostat) | Hex head bolt (1/4-20 x 1 in), nut, 1/4 in lock-washer | Pan head screw (#10-32 x 1.25 in), #10-32 nut, #10 lock-washer, #10 flat-washer | ||
| Thermostats | ||||
| AMC-1A | 2 | Figure 1 | ||
| AMC-1B | 2 | Figure 1 | ||
| AMC-1H | 2 | Figure 2 | ||
| AMC-HT | 2 | Figure 2 | ||
| E507S | 2 | Figure 3 | ||
| AMC-F5 | 2 | Figure 4 | ||
| Junction boxes | ||||
| Adalet XIH | 2 | Figure 5 | ||
| HAK-JBS, HAK-JB3 (Killark HKB boxes) | 2 | Figure 6 | ||
| JBU-100-A(6), JBU-100-L-A | 2 | Figure 7 | ||
Mounting Patterns Descriptions
Figure 1: Thermostats AMC-1A, AMC-1B
This pattern shows two devices mounted side-by-side. The bracket has two sets of mounting holes, each set accommodating two fasteners.
Figure 2: Thermostats AMC-1H, AMC-HT
Similar to Figure 1, this pattern mounts two devices side-by-side. The bracket features two sets of mounting holes, each designed for two fasteners, with a slightly different alignment compared to Figure 1.
Figure 3: Thermostat E507S
This pattern is for mounting a single device. The bracket has two mounting holes arranged diagonally, suitable for the E507S thermostat.
Figure 4: Thermostat AMC-F5
This pattern is for mounting a single device. The bracket includes two mounting holes configured diagonally, distinct from the arrangement in Figure 3, for the AMC-F5 thermostat.
Figure 5: Junction Box Adalet XIH
This pattern is for mounting a single junction box. The bracket features four mounting holes arranged in a rectangular configuration to accommodate the Adalet XIH junction box.
Figure 6: Junction Boxes HAK-JBS, HAK-JB3
This pattern is for mounting a single junction box. The bracket has two mounting holes in a specific configuration suitable for HAK-JBS or HAK-JB3 (Killark HKB) boxes.
Figure 7: Junction Boxes JBU-100-A(6), JBU-100-L-A
This pattern is for mounting a single junction box. The bracket utilizes three mounting holes arranged in a triangular pattern for JBU-100-A(6) or JBU-100-L-A junction boxes.
Contact Information
For support or inquiries, please contact Chemelex:
North America
Tel: +1 800 545 6258
Email: info@chemelex.com
Latin America
Tel: +1 713 868 4800
Email: info@chemelex.com
Europe, Middle East, Africa, India
Tel: +32 16 213 511
Fax: +32 16 213 604
Email: info@chemelex.com
Asia Pacific
Tel: +86 21 2412 1688
Email: infoAPAC@chemelex.com
Home - Chemelex
