PF1 Pro Laser Rangefinder Quick Start Guide

Product Overview

The PF1 Pro Laser Rangefinder features several key components:

• 1. Mode Button: Short-press to switch modes.
• 2. Power/Measure Button: Short-press to power on/off. After power-on, short-press to range, or long-press to scan (continuous measurement).
• 3. Diopter Dial: Rotate to adjust eyepiece focus.
• 4. Slope Function Indicator: Lights on when the slope function is enabled.
• 5. USB-C Charging Port: Port for charging the device.

Diagram Description: An illustration shows the top and side views of the PF1 Pro Laser Rangefinder with numbered callouts corresponding to the buttons and ports described above.

Display Instructions

The device display shows the following information:

• 1. Battery Level: Indicates the remaining battery charge.
• 2. Line of Sight Distance & Unit: Displays the measured distance and its unit (M for meters, Y for yards).
• 3. Flag-Lock Mode: Indicates when the flag-lock feature is active.
• 4. Aiming Circle: A reticle used for targeting.
• 5. Coach Mode: Indicates when Coach Mode is selected.
• 6. Scan Mode: Indicates when continuous scanning is active.
• 7. Slope Angle: Displays the calculated slope angle.
• 8. Slope-Adjusted Distance & Unit: Shows the distance adjusted for slope, along with its unit.

Diagram Description: A close-up view of the PF1 Pro's display screen, showing various icons and numerical readouts for battery level, distance, modes, slope, etc., with numbered labels pointing to each element.

Using Coach Mode

To use Coach Mode, short-press the Mode button. This mode allows you to measure the distance from the device to the ball (P) and then to the pin (P1). The PF1 Pro automatically calculates and displays the yardage from the ball to the pin (P-P1).

Diagram Description: An illustration depicts a golf course scenario. The user aims the rangefinder at the ball (labeled 'P') and then at the pin (labeled 'P1'). Yellow lines indicate the laser paths. A calculation '(P-P1)' is shown, representing the distance between the ball and the pin. Zoomed-in circles show how the device display would appear during these measurements, indicating distances and modes.

For more detailed instructions, specs sheet, attentions, and troubleshooting, please refer to the User Manual.

Company Information and Compliance

Mileseey Technology (US) Inc.

Office Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY, CA 91748

Manufacturer: Shenzhen Mileseey Technology Co., Ltd.

Manufacturer Address: No.3601 Block A, Tanglang Town Plaza West, Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China

Store: www.mileseeygolf.com

E-mail: mileseeytools@mileseey.com

MADE IN CHINA

Compliance Marks: FC, CE, ROHS.

Recycling Information (FR):

Vous êtes responsable de remettre tous les appareils électriques et électroniques usagés à des points de collecte correspondants. Pour en savoir plus: www.quefairedemesdechets.fr

Cet appareil et ses piles se recyclent. À DÉPOSER EN MAGASIN OU EN DÉCHÈTERIE. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil !