Introduction
Thank you for choosing a MILESEEY product. This user manual provides comprehensive information for the MILESEEY IONME 2, an elite golf rangefinder designed to enhance your game. Please read this manual thoroughly before use and keep it for future reference.
Product Overview
The MILESEEY IONME 2 is a compact and powerful golf rangefinder, easily fitting into any pocket. It features an impressive 7.5° field of view and 6X magnification, delivering crystal-clear visuals and sharp focus on every detail. The innovative Rain & Fog mode ensures accurate measurements even in challenging weather conditions. With the industry-leading PinPoint Green™ mode, the IONME 2 revolutionizes how golfers read the green, significantly improving putting accuracy.
Key Features
- Compact and portable design
- 6X magnification and 7.5° field of view
- Rain & Fog mode for all-weather accuracy
- PinPoint Green™ mode for enhanced putting
- Bite Magnetic Mount for secure attachment
Safety Instructions
Warning: Never look directly into the laser aperture or aim the device at the sun, as this can cause permanent eye damage and harm internal components. Avoid storing the device in extreme temperatures (-10°C to 60°C). The device contains a neodymium magnet; keep it away from pacemakers and defibrillators. Be mindful of potential electronic damage to sensitive devices and avoid pinching hazards when attaching the magnet.
Maintenance
For optimal performance, gently clean the lens with a soft brush or by blowing on it to remove dust. For smudges, use the provided microfiber cloth, lightly breathing on the lens for moisture and wiping gently in a circular motion. Avoid abrasive materials. For deep cleaning, use photographic lens tissue with lens cleaning fluid or isopropyl alcohol. The rangefinder is water-resistant but not waterproof; do not submerge it in liquids.
Operation
To power on, briefly press the power button. The device will automatically power off after 16 seconds of inactivity. To measure, aim the crosshairs at your target (at least 5 yards away) and press and hold the Power/Measure button. A blinking aiming circle indicates the laser is active. The distance will be displayed upon successful measurement. Short press the Mode button to switch between Flag-lock Mode, PinPoint Green™ Mode, and Coach Mode.
