Philips Shaver Series 3000

Important Safety Information

Only use the product for its intended purpose. Read this important information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries. Accessories supplied may vary for different products.

Warning

• To charge the product, only use a certified safety extra low voltage (SELV) supply unit with output rating 5 V, ≥ 1 A. For safe charging in a moist environment (e.g., in a bathroom), only use an IPX4 (splash-proof) supply unit. A suitable supply unit (e.g., Philips HQ87) is available via www.philips.com/support. If you need support finding the correct USB supply unit, contact the Consumer Care Center in your country (see the international warranty leaflet for contact details). Using a non-certified supply unit may cause hazards or serious injuries.
• Keep the USB cable, the USB supply unit, and the charging stand (if provided) dry. [Illustration: USB cable, power unit, and stand shown dry]
• This appliance is waterproof. [Illustration: Waterproof symbol] It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the appliance can therefore only be used without cord.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Do not modify the supply unit.
• Do not use the supply unit in or near wall sockets that contain an electric air freshener to prevent irreparable damage to the supply unit.
• Do not use a damaged appliance. Replace damaged parts with new Philips parts.
• Because of hygiene, only one person should use the appliance.
• Unplug the appliance before cleaning it with water.
• Only use cold or lukewarm water to clean the appliance.
• Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids to clean the appliance.
• Water may drip from the socket at the bottom of the appliance when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the appliance.
• Only use original Philips accessories or consumables.
• Charge, use and store the product at a temperature between 10 °C and 35 °C.
• Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
• If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
• Do not place products and their batteries in microwave ovens or on induction cookers.
• Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
• If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Recycling

• The product and batteries shall not be disposed of with normal household waste. [Illustration: Recycling symbol with crossed-out bin]
• Follow your country’s rules for the separate collection of electrical products and batteries.

Removal of built-in rechargeable battery

The built-in rechargeable battery must only be removed by a qualified professional when the appliance is discarded. Before removing the battery, make sure that the appliance is disconnected from the wall socket and that the battery is completely empty.

Take any necessary safety precautions when you handle tools to open the appliance and when you dispose of the rechargeable battery.

When you handle batteries, make sure that your hands, the product and the batteries are dry.

To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g., coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard them.

1. Check if there are screws in the housing of the appliance. If so, remove them.
2. Remove any additional screws, panels or parts of the appliance until you see the printed circuit board with the rechargeable battery.
3. Remove the rechargeable battery.

Product Usage and Maintenance

Charging the Shaver

To charge the shaver, connect the USB cable to the shaver and a suitable USB power supply unit. Ensure the cable, power unit, and charging stand (if provided) are kept dry.

Charging indicators:

• A battery indicator on the shaver shows the charging status.
• Charging time varies by model: approximately 30 minutes for S31XX, and 60 minutes for S33XX and S32XX.
• Charging status lights indicate when charging is complete.

Shaving

The shaver is waterproof and suitable for wet or dry shaving.

• Dry Shaving: Use the shaver directly on dry skin.
• Wet Shaving: Apply shaving foam or gel for a smoother shave.
• Shower Use: The shaver is safe for use in the shower.

Cleaning the Shaver

The shaver can be cleaned under running water.

1. Unplug the appliance before cleaning.
2. Rinse the shaver.
3. Remove the shaving head.
4. Clean the shaving head thoroughly.
5. Clean the shaver body.
6. Dry all parts completely before reassembly or storage.

Replacing Shaving Heads

The shaver uses SH30 replacement heads.

1. Remove the shaving head cover.
2. Twist and lift off the old shaving heads.
3. Insert the new SH30 shaving heads until they click into place.
4. Replace the shaving head cover.