V-TAC VT-7204 LED Designer Table Lamp Installation Instructions
Brand: V-TAC
Model: VT-7204
Technical Data
| Model | VT-7204 |
|---|---|
| Watts | 12W |
| Lumens | 1200LM |
| CRI | >80 |
| PF | >0.9 |
| Beam Angle | 120° |
| Operation Temperature | -20°C to +45°C |
| Input Power | AC:220-240V, 50/60Hz |
| Dimension | Ø200x335mm |
Introduction & Warranty
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
Warranty: 3-Year Warranty
Warnings
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Installation must be performed by a certified person.
- For Indoor use only.
- Change the lamp shade in case if it's broken.
- Cut off the power in case of abnormal performance and contact a professional technician or local dealer.
Caution, risk of electric shock. ⚡️
This marking indicates that this product should not be disposed of with other household wastes. ♻️
Installation Diagram
A diagram illustrating the setup of the LED Designer Table Lamp. It shows the lamp unit, power connection, and a touch switch. Key components are indicated with labels like "TOUCH SWITCH".
Maintenance
- Cleaning and check the lamp on time for safety and better performance.
- Cut off the power before cleaning.
Remote Control Key Specifications
User Manual
- 1 - LED indicator: LED will flicker when any key is pressed.
- 2 - ON/Pair: Short-press to light the LED lamp. Long-press to pair the remote controller and LED driver within 10 seconds of powering on the driver.
- 3 - OFF/Unpair: Short-press to turn off the LED lamp. Long-press to unpair the remote controller and LED driver within 10 seconds of powering on the driver.
- 3/6 - Brightness adjustment: Short-press key 3 to increase brightness, short-press key 6 to decrease brightness. Long-press keys to change brightness continuously.
- 4/7 - Color temperature adjustment: Short-press key 4 to increase cool white and decrease warm white. Short-press key 7 to increase warm white and decrease cool white. Long-press keys to change color temperature continuously.
Notes:
- Long-press: 2-3 seconds, Short-press: less than 1 second.
- LED lamps must connect positive poles together. Red output wires connect to the positive pole, black output wires connect to the negative pole of the two channels.
- To pair or unpair: Long-press key 2 (for pairing) or key 5 (for unpairing) within 10 seconds after turning on the LED lamp until the LED on the driver's PCB stops flickering.
- One LED driver (lamp) can be controlled by a maximum of two remote controllers. One remote controller can control multiple LED drivers (no limit).
Technical Specifications (Remote Control)
| No. | Parameter | Technical Guideline |
|---|---|---|
| 1 | Operation frequency | 2436.20MHZ |
| 2 | Frequency band | 2436.20 +/- 0.03 MHZ |
| 3 | Transmit power | 10 mW |
| 4 | Working voltage | 1.8~3.6 VDC (Normal: 2X1.5VDC, AAA alkaline battery) |
| 5 | Modulation mode | MSK |
| 6 | Transmit speed | 250Khz |
| 7 | Number of channels | 1 |
| 8 | Mode of operation | Simplex |
| 9 | Operation temperature | +5°C-+45°C |
| 10 | Cover color | WHITE |
| 11 | Operational life time | >25,000 Times |
| 12 | Noise level (dB) | <25db at 30cm distance |
| 13 | IP Rating | IP20 |
| 14 | Class Type | Class 3 |
| 15 | Dimension | 14x38x130mm |
Contact Information
For any query or issue with the product, please reach out to: SUPPORT@V-TAC.EU
For more product range inquiries, please contact your distributor or nearest dealer. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
