V-TAC LED Waterproof Lamp Instruction Manual

Technical Data

MODEL	SKU	WATTS	LUMENS	BEAM ANGLE	DF	CRI	INPUT POWER	LIFE SPAN [Hours]	ON/OFF CYCLE	MAX CONNECTABLE UNITS	DIMENSION	MATERIAL
VT-6076	216282, 216283	18W	2160LM	120°	≥0.7	≥80	AC: 220-240 50/60Hz	25,000	≥15000	16	600x66x58mm	PC
VT-1249	216284, 216285	36W	4320LM	120°	≥0.9	≥80	AC: 220-240 50/60Hz	25,000	>15000	8	1200x66x58mm	PC
VT-1574	216286, 216287	48W	5760LM	120°	≥0.9	≥80	AC: 220-240 50/60Hz	25,000	≥15000	6	1500x66x58mm	PC

Introduction & Warranty

Thank you for selecting and purchasing a V-TAC product. V-TAC aims to provide the best service. Please read these instructions carefully before installation and keep this manual for future reference. For any queries, contact your dealer or local vendor. The warranty is valid for 2 years from the date of purchase. It does not cover damage caused by incorrect installation or abnormal wear and tear. The company is not liable for surface damage due to incorrect product removal or installation. Products are suitable for 10-12 hours of daily operation; 24-hour usage voids the warranty. This product is warranted for manufacturing defects only.

Warnings

Please turn off the power before starting installation.
Installation must be performed by a qualified electrician.
The light source of this luminaire is not replaceable; the entire luminaire must be replaced when the light source reaches its end of life.
If the external flexible cable or cord is damaged, it must be replaced exclusively by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.
Terminal block is not included. To be connected with a Waterproof Cable Hose.

Installation Instructions

Switch OFF the power before starting the installation.
Fasten the two mounting clips to the installation surface.
Open the end cap and take out the connector (refer to Figure 1).
Link to the power source (refer to Figure 2).
Cover the back end cap.
Install the lamp to the mounting clips (refer to Figure 3).
Refer to Figure 4 for hanging installation type.
Switch ON the power to test the light.

Diagram Descriptions

Installation Diagram

Figure 1: Shows opening an end cap to access and remove a connector.

Figure 2: Illustrates connecting the power cord to the luminaire.

Figure 3: Depicts mounting the lamp onto the previously fastened mounting clips.

Figure 4: Shows the hanging installation method, using a hanging cord attached to mounting clips.

Linkable Connection

Illustrates connecting multiple units together. It shows a power cord extending from one unit to connect to the next, secured by mounting clips.

Wiring Diagram

Shows the wiring connections: BROWN wire connects to 'L' (Live), and BLUE wire connects to 'N' (Neutral).

Product Information

Recycling Information: The symbol ?️ (crossed-out waste bin) indicates that this product should not be disposed of with other household wastes. Please dispose of it at designated collection points for electrical and electronic equipment.

Safety Note: ⚡ Caution, risk of electric shock.

Component Notes: The luminaire features non-replaceable control gear and a non-replaceable light source.

Certifications: RoHS, CE, UKCA.

For any query or issue with the product, please reach out to SUPPORT@V-TAC.EU. For more product ranges, contact your distributor or nearest dealers.

V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

	V-TAC LED Waterproof Batten Light Installation Manual & Specifications Comprehensive instruction manual and technical specifications for V-TAC LED Waterproof Batten Lights (VT-41004 series). Includes installation guide, sensor settings, and warranty information.
	V-TAC LED Waterproof Lamp Installation Instructions and Warranty Comprehensive guide for installing V-TAC LED Waterproof Lamps (VT-6048, VT-1248, VT-1548). Includes technical specifications, safety warnings, installation steps, diagram explanations, and warranty details. Content is primarily in English, with multilingual support for key sections.
	V-TAC LED Flood Light Installation and Warranty Manual Comprehensive guide for installing and maintaining V-TAC LED Flood Lights, including technical specifications, safety warnings, and warranty information. Covers models VT-44012, VT-44208, VT-44109, VT-44022, and VT-44054.
	V-TAC LED Street Light Installation Guide & Technical Data Comprehensive installation guide and technical specifications for V-TAC LED Street Lights (VT-30ST, VT-50ST, VT-100ST, VT-150ST). Includes safety warnings, wiring diagrams, and warranty information.
	V-TAC LED Street Light Instruction Manual and Technical Specifications Official instruction manual for V-TAC LED Street Lights (VT-39ST, VT-59ST, VT-79ST, VT-139ST, VT-169ST). Includes technical data, installation guide, safety warnings, warranty information, and disposal instructions.
	V-TAC T8 LED Tube Installation Instructions Comprehensive installation guide for V-TAC T8 LED Tubes, covering technical specifications, safety warnings, and step-by-step installation procedures for new fittings and replacement of fluorescent lamps. Includes multilingual instructions.
	V-TAC T8 LED Tube Installation Instructions Comprehensive guide for installing V-TAC T8 LED tubes, covering new installations and replacements of fluorescent tubes. Includes technical data, safety warnings, and warranty information.
	V-TAC T8 LED Tubes Installation Manual and Technical Data Instruction manual for V-TAC T8 LED Tubes, covering installation, warranty, technical specifications, and safety guidelines. Includes models VT-061, VT-121, VT-151, VT-062, VT-122, VT-152.