Manuals+

Appliance Installation Dimensions and Technical Specifications

Appliance Overview and Door Specifications

This section details the overall external dimensions of the appliance and specifications related to its door.

DimensionValueNotes
Overall Width597 mm
Overall Depth556 mm
Overall Height859 mm
Door Opening Heightmin. 757 mmMinimum clearance required when the door is opened fully.
Door Load Capacitymax. 10 kgThe maximum weight the appliance door can support.

Installation Space and Cabinet Requirements

This section provides detailed requirements for the installation space, including cabinet dimensions and necessary clearances for ventilation.

Cabinet Integration Dimensions

ParameterDimensionNotes
Cabinet Height Range860-920 mmAdjustable height for fitting into standard kitchen cabinets.
Cabinet Width600 mmStandard width for the installation cabinet.
Appliance Minimum Width/Depthmin. 560 mmMinimum internal width or depth required within the cabinet for the appliance.
Appliance Depth (Side View)556 mmThe actual depth of the appliance unit.

Cut-out and Clearance Details

FeatureDimensionLocation/Notes
Base Cabinet Width556 mmWidth of the specific cut-out or opening in the base cabinet.
Front Edge to Appliance Base18 mmDistance from the front face of the cabinet to the appliance's base.
Floor to Appliance Base60 mmHeight from the finished floor level to the bottom of the appliance.
Floor to Appliance Top860 mmHeight from the finished floor level to the top of the appliance.
Lower Rear Cut-out100 mm x 60 mmDimensions of a specific cut-out at the lower rear of the cabinet for services.
Rear Clearance66 mmSpace required behind the appliance for connections or airflow.
Lower Ventilation/Airflow Area150 cm²Minimum required free area for ventilation at the bottom rear of the appliance.
Top Ventilation/Airflow Area150 cm²Minimum required free area for ventilation above the appliance.
Bottom Edge Measurement (Front)109 mmDistance from the front edge of the cabinet to a reference point on the appliance's bottom rear.
Bottom Edge Measurement (Back)55 mmDistance from the back edge of the cabinet to a reference point on the appliance's bottom rear.

PDF preview unavailable. Download the PDF instead.

v1 Adobe Photoshop for Windows -- Image Conversion Plug-in Adobe Photoshop 26.6 (Windows)

Related Documents

Preview Product Dimensions and Specifications
Technical specifications detailing the dimensions of a product, including overall size, component measurements, and adjustable ranges for installation and integration.
Preview Armchair Dimensions and Specifications
Provides detailed measurements for an armchair, including overall dimensions, seat size, and arm height, based on visual representation.
Preview Product Dimensions Diagram
Diagram showing the dimensions of a product, including width, height, and depth, with measurements in both millimeters and inches.
Preview Technical Dimensions for Pole Structure
Detailed technical dimensions and specifications for a pole structure, including overall height, mounting hole locations, and width measurements.
Preview Product Specifications Table
A table detailing product specifications including width, depth, height, strap length, weight, and material. Manual measurements may have a 1-3cm error, with units in cm.
Preview Product Dimensions and Specifications
Detailed dimensions and specifications for the product, including length, width, and height measurements.
Preview Technical Drawing and Dimensions of Component
Detailed technical drawing with dimensions for a component, including length, width, height, and radii. The drawing provides precise measurements for manufacturing and assembly.
Preview Product Specifications: Dimensions, Weight, and Material
Detailed specifications for a product, including length, width, height, weight, and material. Measurements are in centimeters and the weight is in kilograms. The material is nylon. Note that measurements are manual samples and may have a 1-3cm error.