Technical Specifications and Dimensions
This document provides detailed technical specifications and dimensions for a component, presented through a series of technical drawings. The measurements are critical for manufacturing and assembly processes.
Overall Dimensions
The component has the following primary dimensions:
- Length: 8.56 inches (7.87 inches indicated as a secondary measurement)
- Width: 5.46 inches (4.72 inches indicated as a secondary measurement)
- Height: 5.79 inches (5.2 inches indicated as a secondary measurement)
Detailed Measurements and Features
Specific features and their corresponding dimensions are detailed below:
- A radius of R8 is noted on a corner.
- A thickness of 0.7 inches is indicated for a specific section.
- A base width of 1.38 inches is shown.
- Another section has a width of 1.69 inches.
- A depth of 2.67 inches is measured.
- A length of 4.13 inches is provided for a specific segment.
- A thickness of 0.31 inches is noted.
- A thickness of 0.39 inches is noted.
- A thickness of 0.59 inches is noted.
- A length of 6.3 inches is indicated.
- A radius of R5 is present.
- A radius of R15 is present in multiple locations.
- A radius of R20 is present.
- An angle of 50.9 degrees is specified.
- A length of 10 is indicated.
- A diameter of Ø35 is specified for a circular feature.
Visual Description of Drawings
The provided image contains three orthographic views of the component:
- Top View: Shows the overall length and width, with a radius on one corner and a detail indicating a thickness of 0.7 inches and a base width of 1.38 inches.
- Front/Side View (Angled): Displays a more complex shape with several angled sections and radii. Key dimensions include lengths of 4.13 inches and 6.3 inches, thicknesses of 0.31, 0.39, and 0.59 inches, radii of R5, R15, and R20, an angle of 50.9 degrees, and a diameter of Ø35.
- Side View: Presents a profile view showing the height, a thickness of 0.7 inches, a width of 1.69 inches, and a depth of 2.67 inches.
