Bobtot B701 5.1 Channel Home Theater System

Introduction

Thank you for purchasing the BOBTOT B701 5.1 Channel Home Theater System. This powered home theater system creates a new performance level in home theater speakers.

Includes:

• Subwoofer with built-in receiver
• (2) Front Speakers
• (2) Rear Speakers
• (1) Center channel speaker
• Remote Control
• Signal Cable
• Antenna Cable
• Manual

Important Safety Instructions

⚠️ TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE AMPLIFIER PLATE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TAKING THE UNIT TO A QUALIFIED SERVICE TECHNICIAN FOR ANY REPAIRS.

• Do not place speakers on an unstable surface. The speaker may fall over, causing serious injury to a child or adult, and serious damage to the unit.
• Do not place speakers near water, for example, near a bathtub, sink, in a wet basement, or near a swimming pool.
• The speakers should be situated away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Clean only with a soft damp cloth. Unplug the main unit from the wall outlet before cleaning.

Setup

Place speakers in the desired position and refer to the positioning diagram on the next page. Using the included color coded speaker cables, connect the center, front, and satellite speakers to the corresponding Audio Output RCA plugs on the subwoofer unit.

Diagram Description: Illustrates the rear of the subwoofer unit showing connections for Front L/R, Center, and Rear L/R speakers. Arrows indicate connection points. It also shows audio input connections for TV, DVD, and Computer.

Component Connections

This system allows you to connect to an optical port for sound signal from any 5.1 channel optical output enabled source such as TV, Digital set-top boxes, game consoles, DVD players, Blu-ray players, CD players, etc.

Please refer to the following steps to connect with sound output:

• Set your TV's sound output to external speakers.
• For TV, DVD, Blu-ray, Game Console: Use to deactivate Dolby Pro-Logic, Dolby ATMOS, etc. and select PCM format.
• RCA AUX INPUT: Use the RCA Auxiliary jacks to connect computers, or other devices with RCA output. Connect to the RCA AUX input on the unit with an RCA to 3.5mm Y cable.
• DIGITAL OPTICAL INPUT: Use these RCA jacks to input the sound signal from any 5.1 channel output enabled source such as a TV, Digital set-top boxes, game consoles, DVD players, Blu-ray players, CD players, etc.

Diagram Description: Shows the rear panel of the main unit with labeled input and output ports: OPTICAL INPUT, COAXIAL INPUT, AUX AUDIO INPUT, FM ANT, BT, DVD AUDIO INPUT, POWER. It also shows AUDIO OUTPUT ports for Front L/R, Center, Subwoofer, and Rear L/R.

Diagram Description: Shows the front panel of the main unit with labeled controls and input sockets: ST BY, INPUT, CH-/VOL-, CH+/VOL+, AUTO/▶️, SD/MMC CARD (USB, MIC1, MIC2).

Positioning the Speakers

1. Mount the speakers on the wall, directly to the left and right of the center channel speaker. Angle them towards the listening position. Ideally, the tweeters should be at ear level.

2. The center channel speaker should be placed directly in front of the listening position, centered with the front sound source, if possible, or as necessary to direct true sound to ear level.

3. Mount the front speakers on the wall, directly to the left and right of the center channel speaker. Angle them towards the listening position. Ideally, the tweeters should be at ear level.

4. Mount the satellite speakers on the wall, slightly behind the listening position, about 15-30 degrees behind the side speakers. This isn't possible then to the rear of the listening position and angle them forward.

Diagram Description: A top-down view illustrating optimal speaker placement around a listener. It shows the positions for front left/right, center, rear left/right, and subwoofer speakers, including suggested angles for optimal sound projection.

Remote Control Functions

• ⚡ Power/Standby: Input switch between input modes: USB/SD/FM/AUX/DVD/OPT/COAX/BT
• MUTE: Mute all output
• 5.1/2.1: Channel mode select
• SLEEP: Setting the sleep timer
• SHUFFLE: Shuffle play mode
• TUNE - / +: Manually tune FM stations
• ▶️|| / ||▶️: Play/Pause in USB/SD/BT modes
• AUTO: Automatic station search
• CH- / CH+: Previous FM station/previous USB/SD track
• NEXT / NEXT: Next FM station/next USB/SD track
• FL - / FL +: Front left speaker volume control
• FR - / FR +: Front right speaker volume control
• SW - / SW +: Center speaker volume control
• CEN - / CEN +: Center speaker volume control
• VOL - / VOL +: Master volume control
• SL - / SL +: Front left speaker volume control
• SR - / SR +: Front right speaker volume control
• 0-9: Number pad used to select tracks/stations
• REPEAT: Repeat one song/repeat all songs/shuffle
• RESET: Reset volume level
• MIC +/- (EQ +/-): When a mic is connected, these buttons will control the mic volume. When EQ is selected, these buttons will control the EQ level. Note: connecting mics will override the EQ +/- function.
• ECHO +/-: When a mic is connected, these buttons will control the echo effect. If there are no mics connected, they will control the display brightness. Note: connecting mics will override the ECHO +/- function.

Diagram Description: Depicts a remote control with various buttons clearly labeled to correspond with the functions listed above, including power, mode selection, volume, tuning, playback, and microphone controls.

Front Panel Details

• ST BY [Standby]: Stand by function by pressing it 3 secs.
• INPUT: Input function key, switch among AUX/USB/SD/ FM/OPTICAL/COAXIAL mode.
• 5.1/2.1: 5.1/2.1 function Key.
• CH-/VOL-: 'Previous' function Key. Previous song when USB/SD input; Previous channel when FM input; Decrease the play time button.
• AUTO/▶️: SB/SD pause/Play function key. When the FM state: when the automatic search and save the radio station.
• CH+/VOL+: 'next' function Key. Next song when USB/SD input; Next channel when FM input; Increase the play time button.
• SD/MMC CARD: SD card socket
• U DISK: USB socket
• MIC 1: MIC 1 socket
• MIC 2: MIC 2 socket

Diagram Description: Shows a side view of the main unit, highlighting its slim profile. Another view shows the front panel with a digital display and several circular buttons or indicators.

Rear Panel Details

• 1. Power input
• 2. Power switch
• 3. Optical audio input
• 4. Coaxial audio input
• 5. FM antenna
• 6. RCA AUX IN
• 7. RCA DVD/TV audio input
• 8. Center subwoofer RCA DVD audio input
• 9. Rear L/R RCA audio input
• 10. Center RCA audio output
• 11. Front L/R RCA audio output
• 12. Rear L/R audio output

Bluetooth (BT)

Connect your iPod, iPhone, MP3 player, Android phone or any other BT capable device following the steps listed below:

1. Press the INPUT button and the power switch is in the ON position.
2. Press the INPUT button on the remote control or push the INPUT button on the unit until the digital read out shows 'BT'.
3. Search for 'B701' on your list of available devices and select it.
4. If your device requires a password, please use '0000'.

USB/SD Card Playback

Plug in your SD card or USB flash drive. The unit will automatically read the files and play.

Optical/Coaxial Input

Many TVs, Digital set-top boxes, game consoles, and DVD players have optical fiber output. If your device is capable, connect its Optical or Coaxial input, follow the steps listed below.

1. Make sure the unit is plugged in and the power switch is in the ON position.
2. Press the OPT/COAX button on the remote control or push the INPUT button on the unit until the digital read out shows 'OPT' or 'COA'.
3. Use a digital optical audio cable to connect the speakers to the source.

MIC INPUT

Use the system for karaoke music via either one of the 'L' inputs for microphones. The system will automatically adjust the microphone volume by pressing the MIC - or MIC + buttons on the remote. Additionally, you can use the mic echo effect by pressing the ECHO - or ECHO + buttons on the remote.

FM Radio

1. Make sure the unit is plugged in and the power switch is in the ON position. Be sure to connect the included FM antenna.

2. Press the INPUT button on the remote control or push the INPUT button on the unit until the digital read out shows numbers.

3. Press the TUNE - / + buttons to navigate to desired stations.

4. Press and hold the AUTO button for 3 seconds. The unit will begin to automatically search and save the available stations.

To manually tune stations:

• Use the TUNE - / + buttons to find a station you like and that is coming in clearly.
• Press the SAVE button. CHAN will start flashing on the screen. Use the CH-/CH+ buttons to select the channel number you want to save.
• Press the SAVE button again. This will set the channel & the message 'good' will be displayed for 2 seconds.

Features

• 5.1 Channel Home Theater System
• Bluetooth play system with everything you need right out of the box
• 800 Watts Program Power
• 400 Watts Program Power
• 200 Watts Continuous RMS Power
• 1 x 3" Center Channel speaker
• 1 x 3" Center Channel speaker
• USB input (max file size 16GB)
• SD input (max file size 16GB)
• 5 MIC inputs with karaoke function for karaoke
• 5 RCA audio inputs
• 6 RCA audio inputs
• RCA AUX inputs
• Optical audio input
• Coaxial audio input
• FM antenna input
• Full function remote

Specifications

• Cable length: Front L/R: 2M, Rear L/R: 4M, Center: 2M
• Frequency response: 20Hz - 20KHz
• Amplifier: Class AB, very efficient amplifier with top components!
• Signal to noise ratio: ≥70dB (Maximum output with THD+1=1%)
• System impedance: 6.5 driver: 6 ohm/3" driver: 4 Ohm
• Power voltage: 120V/60Hz
• Subwoofer dimensions: (W*H*D):W198xH330xD318mm
• Center speaker dimensions: (W*H*D):W101xH180xD102mm
• Front/Rear speaker dimensions: (W*H*D):W101xH180xD102mm
• Rear L/R satellite speaker dimensions: (W*H*D):W104xH180xD102mm
• Net weight: 8.4Kg

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:

Changes or Modifications not expressly approved by the party responsible could void the user's authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.