BNT Solar Street Light User Manual
Important Safety Information
Reading this user manual thoroughly before using the product is essential for your safety and the safety of others.
The Contents of the Package
What's in the box:
- Solar Street Light Unit
- Mounting Bracket
- Mounting Hardware (bolts and nuts)
- Remote Control
Note: Ensure all components are present before proceeding.
Installation Steps
- Bracket Mounting: Ensure the mounting angle of the bracket matches the position of the solar panel. [check-mark-icon] Verify the mounting angle is correct. [cross-icon] If not, adjust accordingly.
- Align Support: Align the support hole with the lamp body hole. [arrow-right-icon]
- Secure Installation: Insert bolts and nuts to lock the components securely. [bolt-icon] [nut-icon]
Important Notes for Installation:
- Before installing, connect the solar panel with the light's wire and test the light using the remote control.
- To test the light without sunlight, place the lamp in a dark area or cover the solar panel with an opaque material.
- Once testing is complete and normal, mount the solar panel onto the bracket.
- Attach the bracket to the supporting arm, extend the arm, and fix it to the wall or pole using expansion screws.
- To set the timer, use the remote control at night when the light is on. The light has a memory program, so it only needs to be set once.
- Regularly clean the solar panel and the light cover to maintain good light transmittance. Use a dry cloth or rag for cleaning; avoid water or corrosive solutions.
- Keep the light away from corrosive chemicals. The light should be charged and discharged at least once a month.
Recommended Installation Height
The higher the solar street light is mounted, the lower the light intensity will be off the ground. However, a higher mounting position increases the light coverage area. The recommended installation height is 16-32 feet.
[image-description: A diagram showing a solar street light mounted on a pole with a height indicator from 16 to 32 feet, next to a modern house.]
Remote Control Buttons
Motion Sensor Mode
No motion at night: The light operates at 30% brightness.
Motion detected: When a pedestrian triggers the motion sensor, the light operates at 100% brightness.
[image-description: A visual representation of the motion sensor mode. On the left, two figures are walking with the light at low brightness. On the right, a person is detected by the sensor, and the light is at full brightness.]
Contact Us
Scan the QR Code below to activate your warranty. You can extend the warranty for 2 more years.
[QR code image]
Visit: bnt-store.com/warranty
Phone: 1-833-872-6581
Email: support@bnt-store.com
[warranty-badge-image: 2 Year Warranty]
