BNT Solar Street Light User Manual

Product Components Diagram

The BNT Solar Street Light consists of the following components:

• 1. Lamp Body: The main lighting unit containing the LEDs and solar panel.
• 2. Light Arm: The pole or bracket that attaches the lamp body to the mounting structure.
• 3. Washers: Used with screws for secure fastening.
• 4. Backplane: A component for mounting or structural support.
• 5. Screw and nut 7*35mm: Fasteners for assembly.
• 6. Remote Control: Used to operate and configure the light.

[Diagram Description: A visual shows the lamp body, which is a rectangular panel with many small squares representing LEDs, mounted on a long arm. Various hardware components (screws, nuts, washers) are shown separately, labeled with numbers corresponding to the list.]

Installation Instruction

The solar street light can be installed using either a pole mount or a wall mount.

Pole Mount Installation

[Diagram Description: The lamp body is shown attached to an arm, which is then fixed to a vertical pole. The diagram indicates the use of screws (7.8*70mm) and nuts (16.7*4mm) for attachment. Two illustrations show the dimensions of mounting bolts: one with a length of 4.13 inches and a width of 2.56 inches, and another with a length of 2.2 inches and a width of 2.56 inches.]

Wall Mount Installation

[Diagram Description: The lamp body is shown attached to an arm, which is then fixed to a vertical wall. The diagram indicates the use of expansion screws (10*56mm) for attachment.]

Tip: The recommended mounting height for street lights is 16-26 feet.

Remote Control Buttons and Functions

The remote control allows for various settings and operations:

• ON: Sets the device brightness to 100%. The light is programmed to turn on automatically at dusk and turn off at dawn.
• OFF: Disables the light. It will not function or turn on automatically the following day. Manual activation via the remote is required to resume operation.
• ?‍♂️ [Motion Sensor]: The brightness adjusts dynamically based on proximity. It is set to 100% when individuals are nearby and 30% when they are at a distance. This dimming function operates continuously, and the lights will not turn off. They are programmed to automatically turn on at dusk and off at dawn.
• ? [Brightness Levels]: The brightness can be adjusted to four levels: 25%, 50%, 75%, and 100%.
• ⏱️ [Timer]: After 2, 3, 5, 6, or 8 hours of fixed 100% brightness, the device will switch to motion sensor mode.

[Diagram Description: A visual shows a remote control with several buttons labeled ON, OFF, 25%, 50%, 75%, 100%, 2H, 3H, 5H, 6H, 8H. The text "Invalid, please disregard" is present near the remote image, but the functions are described below.]

[Diagram Description: A series of visuals illustrate correct and incorrect placement for remote control operation. One shows a light on a pole with a remote signal reaching it, marked with a checkmark ✔️. Three other visuals show the light obstructed by a wall or window, with signals failing to reach it, marked with crosses ❌.]

Specifications

After Sales Service

If there is any problem with the product, please scan the QR code to fill out the registration. BNT will reply within 48 hours.

[Diagram Description: A QR code is displayed. Below it, a circular badge indicates "2 YEAR WARRANTY".]

BNT Customer Service:

Phone: +18338726581

Email: support@bnt-store.com