Manuals+

W1 PLUS Wireless Air Mouse Remote Control & Mini Keyboard

Product Introduction

This is a rechargeable backlit mini keyboard with a Type-C charging interface and an Air mouse with a built-in buzzer. The buzzer allows for easy location of the remote control by pressing a button on the receiver. It utilizes wireless transmission and integrates functions such as infrared learning, keyboard input, air mouse, and voice control, enabling more convenient and quick control of home theater systems.

Product Features

Product Specifications

Sleep, Wake and Indicator Status

1. The green indicator for connection status flashes slowly. If pairing information is not successfully connected for 15 seconds, it automatically enters sleep state. 2. The green indicator for pairing search status flashes quickly. If pairing fails for 30 seconds, the remote control enters sleep state directly. 3. In a successfully connected state, if no key is pressed, it enters sleep mode in 20 seconds. 4. The green indicator light stops flashing after successful pairing. When a key is pressed, the LED indicator light flashes once and stays on for a long time. 5. Press any key during sleep to wake up.

Charging and Low Battery Indication

In a low battery state, this product will not work normally. When the built-in lithium battery power is lower than 3.4V, the indicator light flashes slowly. At this time, the device needs to be charged before it can be used normally. The charging state product indicator light is on for a long time. The indicator light goes out after charging.

Backlit Function

7 Color backlight version: Press the backlight button to switch the backlight color and turn off the backlight. White backlight version: Press the backlight button to turn the backlight on/off. No backlight version: The backlight button can only output text "www." in "Fn mode". Note: When the Fn indicator light is on, the backlight switch button cannot switch the backlight; it only outputs the text "www.".

How to Program Learning Keys?

Take the "power button" as an example:

  1. Press and hold the [✅ OK] and [?️ Mouse On/Off] buttons simultaneously. The blue LED indicator turns from slightly bright to bright, entering programming mode.
  2. Place the [W1 PLUS] remote and your TV remote control head-to-head on a plane, 1 inch apart.
  3. Press the infrared function key to be learned on [W1 PLUS], such as the [? Power] key. The indicator light flashes.
  4. Press any button on the TV remote control that emits the value of the infrared key (e.g., the TV stick's power button). At this time, the LED light changes from flashing to permanently on. You can then press [W1 PLUS] to learn other keys and continue learning.
  5. Press the [?️ Mouse On/Off] key to exit learning mode and save the learned data.
  6. If no operation occurs for 30 seconds after entering learning mode, it will exit learning mode.

Note: If you want to use it with a different device, you must first cancel the pairing of [W1 PLUS].

How to Reset Infrared Learning Key?

Press and hold the [✅ OK] + [⬅️ BACK] keys for 5 seconds. The blue LED flashes 8 times, indicating successful restoration to factory settings. The [? Power], [✅ OK], [⬅️ BACK], [☰ Menu], [? Volume +], [? Volume -], [▶️ YouTube], [? NETFLIX] keys (a total of 8 keys) support learning. After these 8 keys are successfully learned, whether connected or not, the external code will be red. After the infrared code is cleared, each key will be restored to its factory setting.

Voice Function

Press and hold the voice key to collect voice data; release to stop.

How to Pair

Press and hold the [? Volume +] and [? Volume -] keys on the remote control simultaneously. The indicator light stays on for a long time, indicating pairing mode has been entered and the connection is successful. The rear indicator light goes out. If not successfully connected for 30 seconds, it enters sleep mode.

How to Connect (Only applicable to Bluetooth Mode)

Before pairing [W1 PLUS], ensure it is in pairing mode by pressing and holding the [? Volume+] and [? Volume -] buttons simultaneously. When the blue LED indicator stays on for a long time, release the buttons to enter pairing mode.

Connecting to TV sticks and multimedia players:

Navigate to Settings > Controller and Bluetooth devices > Other Bluetooth devices > Add Bluetooth device > Select [W1 PLUS].

Connecting to NVIDIA Shield:

Navigate to Settings > Remote control and accessories > Add Bluetooth accessories > Select [W1 PLUS].

Note: If you want to switch from one device to another, you must first cancel the pairing of [W1 PLUS]. For example, if [W1 PLUS] is connected to NVIDIA Shield but you want to connect it to another device, follow the unpairing steps first.

Product Function Diagram

The remote control features the following layout:

Key Function Description

Mouse Speed Adjustment

Press and hold the [✅ OK] key, then press [? Volume +]. The green indicator flashes, indicating the mouse speed has increased. Press and hold the [✅ OK] key, then press [? Volume -]. The green indicator flashes, indicating the mouse speed has decreased.

Sensor Calibration

Automatic calibration: To correct cursor drift caused by voltage and temperature changes during use, place the device flat on a desktop and keep it still. After the product wakes from dormancy, calibration is complete.

One Key Positioning Function

Press the touch switch on the USB receiving end. The remote control will beep to indicate its position. The sound will not stop until a button on the remote control is pressed, or it will enter standby after 15 seconds.

⚠️ Matters Needing Attention

⚠️ FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Models: W1 Plus, W1 Plus Wireless Air Mouse Remote Control and Mini Keyboard, Wireless Air Mouse Remote Control and Mini Keyboard, Air Mouse Remote Control and Mini Keyboard, Mouse Remote Control and Mini Keyboard, Remote Control and Mini Keyboard, Control and Mini Keyboard, Mini Keyboard, Keyboard

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7023344 PDFsharp 1.50.5147 (www sharp.com) (Original: Corel PDF Engine Version 22.0.0.412) CorelDRAW 2020

Related Documents

Preview W1 Plus 2.4GHz Voice Remote User Manual
Comprehensive user manual for the W1 Plus 2.4GHz remote control, detailing its features including voice control, air mouse functionality, QWERTY keyboard, and IR learning. Provides step-by-step instructions for pairing, usage, and troubleshooting.