T59 User Manual

TRUE WIRELESS EARBUDS

Package Accessories

Charging Case x1
Earbuds x2
Ear Tips Set x3 (Size M has been preinstalled on earbuds)
Type-C Charging Cable x1
User Manual x1

Overview

Earbud:

LED Indicator on Earbud
Charging Contacts
Multi-functional Button (MFB)
Microphone

Charging Case:

Battery LED Display of Charging Case
Charging Pins on Charging Case
Type-C Charging Port

Product Parameters

Supports: HSP/HFP/A2DP/AVRCP
Charging Interface: Point-Contact
Charging Cord Type: Type-C
Battery Capacity (Li-ion battery inside): Earbud - 45mAh, Charging case - 650mAh
Battery Life: Actual battery life changes with song types and volume requirements.
Standby Time: Up to 100hrs
Charging Time: 1-1.5hrs for earbuds / 2hrs for charging case
Transmission Range: 33 feet (without obstacles)

First-Use

Before the first use, please tear off the isolating film on the earbuds. Put the earbuds into the case, then charge both earbuds and charging case via supplied Type-C charging cable for at least 10 minutes (or after not using for a long time). Do not take out the earbuds during this period.
The earbuds are installed with a pair of size M ear tips by default. You can select other suitable sizes for a secure fit.

How to Wear?

Step 1: Adjust earbuds downwards to a proper position and push earbuds into your ears.
Step 2: Slightly adjust earbuds to fit you best.

How to Pair?

Method 1:

Pick up two earbuds from the charging case. They will auto power on and pair with each other in 10s.
The LED indicators on the buds will flash white-red in sequence continuously; the other bud will blink white slowly.
On your phone, search for "T59" and tap to connect. You will hear "connected" from both earbuds. Then the indicator lights will turn off after the earbuds are connected.

If the earbuds are not connected to your device over 5 minutes, they will power off automatically. Turn on the earbuds manually by pressing the MFB for about 2 seconds to hear the prompt "power on".

Method 2:

In the unconnected state, double-click the MFB of two earbuds to enter pairing mode.

How to Reset?

Take the earbuds out for 5-10 minutes to consume some battery of both buds. (Cannot be reset if the earbuds are fully charged)
Put the earbuds back into the case and make sure both earbuds blink Red.
Press and hold the buttons on both earbuds for 8 seconds. Close the case.

[Hold 8s]

Maintenance

After a period of use, the charging metal contacts of the earbuds may be contaminated with sweat and dirt, resulting in the earbuds not being able to power on, charge, or having connection issues. The protective grille of both earbuds may accumulate earwax and dust, resulting in muffled volume. Please use the cleaning swab to remove dust or earwax from the charging contacts and the protective grille.

Indicator Status

Earphone Indicator Status:

Power-on: White light for 1s.
Power-off: Red light for 1s.
Pairing mode: White light of dual earbuds flash.
Device to be connected mode: White light of the main earphone flashes.
Connected to standby state: White light on the L/R earphone for 1s after connection, then goes out.
Phone state: White light goes out.

Battery Case Indicator Status:

Charge the case: After plugging in the USB charging cable, the LED bar on the front will flash slowly during the charging process.
Charge the earphone with charging case (without external charger): Put the earphone into the charging case; the earbuds will be charged immediately and the red indicator flashes.
Charging case is fully charged (plug cable): LED indicator bar is steady on (flashes slowly during charging).

Functions

Dual Mode / Mono Mode

Power on: Pick up the earbud from charging case / Press and hold the MFB for 2s in power-off state.
Power off: Standby/Non-playing music, press and hold the MFB for 5s. Put into the charging case / Not connected to any devices over 5 minutes.
Activate/Stop voice assistant: Triple click the MFB on L/R earbud.
Reject call: Press and hold the MFB on L/R earbud for 2s.
Answer/End call: Click MFB once.
Play/Pause: Click MFB once.
Next track: Double click MFB on R earbud.
Previous song: Double click MFB on L earbud.

Music Mode

Function	Action
Play/Pause	Press Once (R/L)
Next Track	Press Twice (R/L)
Previous Track	Unsupported
Volume +	Long Press R earbud
Volume -	Long Press L earbud

How to Charge?

Type-C USB Charging

There is a Type-C USB charging cable in the package. Please use it to charge the case directly. During charging, the digital display will flash and show the battery in real-time. After being fully charged, the number is displayed as 100.

The right display panel indicates the charging status per headset. There are separated power consumption indicators by 4 grids in total; the indicator light will always flash during charging.

[100]

Wireless Charging

Charge the case easily without cables, just put your charging case on the wireless charging pad. If the charging case is not being charged, please try to reposition it. (Wireless Charging Pad Not Included)

Troubleshooting Guide

Q1: What should I do when the earbuds can't be paired with my mobile device?

A1: Reset your earbuds and pair the earbuds with your mobile device again.

Q2: What to do when the earbuds can't be charged?

A2: The charging case may run out of power. Please charge it for at least one hour, then put the earbuds into it to charge. Try to take out the earbuds and clean the charging pins, then put the earbuds into the charging case to see if the display panels on the case light up or not. There may be some malfunction with your charging case. If your charging case can't charge for earbuds after many attempts, please contact GOLREX.

Q3: What should I do if there is no sound from one earbud?

A3: Turn off Bluetooth on the device and turn it on, then pair your earbuds with the mobile device again. For Android devices, if there is no sound from one earbud after connecting, you need to check whether the phone volume is too low. If the phone volume is normal, it may be that the volume of the earbud has been turned to the minimum. Please try to adjust the volume of the earbud.

Q4: What device can the earbuds be connected to?

A4: Devices with BT version over 5.0.

Q5: Can my earbuds be paired with multiple devices?

A5: The earbuds do not support this feature currently.

Q6: Can I use one earbud at a time?

A6: Yes. After connecting the earbuds to your mobile device, you can use them together or just use one earbud alone.

Q7: Can I activate voice assistant through my earbuds?

A7: Yes. You can wake up the voice assistant by tapping the Touch pad of either earbud 3 times after pairing the earbud with your mobile device.

Kindly scan the QR code to activate the lifetime warranty of your earbuds within 15 days. Visit www.golrex.net.

	GOLREX T59 True Wireless Earbuds User Manual Comprehensive user manual for the GOLREX T59 True Wireless Earbuds, covering package contents, product overview, pairing, wearing instructions, charging, button operations, maintenance, and troubleshooting.
	Golrex T59 True Wireless Earbuds User Manual User manual for the Golrex T59 True Wireless Earbuds, covering setup, pairing, usage, charging, and troubleshooting.
	Golrex T59 True Wireless Earbuds User Manual This user manual provides instructions and specifications for the Golrex T59 True Wireless Earbuds, covering setup, pairing, usage, and product details.
	Golrex T59 True Wireless Earbuds User Manual User manual for the Golrex T59 True Wireless Earbuds, covering package contents, overview, product parameters, how to wear, pair, reset, charge, maintenance, indicator status, button operations, and troubleshooting.
	Golrex T59 True Wireless Earbuds User Manual User manual for the Golrex T59 True Wireless Earbuds, detailing package contents, product overview, specifications, how to wear, pair, reset, charge, and troubleshooting tips.
	GOLREX T59 True Wireless Earbuds User Manual User manual for the GOLREX T59 True Wireless Earbuds, covering package contents, overview, product parameters, how to wear, pair, reset, charge, and troubleshooting.