Simtab Media 18 Pro Projector User Manual

The packing list includes:

• Media 18 Pro Projector
• Remote Control
• User Manual
• AV Cable
• HDMI Cable
• Power Cable

Notice:

Recommended: For optimal viewing, ensure the projector is placed on a stable surface and aimed correctly. The diagram shows a projector correctly positioned for viewing a video.

NOT Recommended: Avoid placing the projector in unstable positions or with obstructed lenses, as depicted in the 'NOT Recommended' diagrams.

The projector features the following ports and controls:

• Side Panel: SD Card Slot, AV In, Audio Out
• Rear Panel: IR Receiver, VGA, USB HD-1, HD-2, 5V Out, Speaker, Power Input

Remote Control Functions:

• On/off
• Play/Pause
• Input Source
• Volume Up/Down
• Mute
• Menu
• OK
• Up/Down/Left/Right Navigation
• Fast Reverse
• Fast Forward
• Previous
• Next
• Power Button

Projector Controls:

• UP, Down, Left, Right Navigation
• OK Button
• Play/Pause Button
• Source Button
• Menu Button
• Power Button

1. Plug the power cable into an outlet.
2. Press the power button to turn on the projector.
3. Connect your device to the projector correctly using the appropriate cable (HDMI, AV, VGA, or USB).
4. Select the correct input source to project your device's content.
5. Adjust the keystone and focus rings to achieve the best image performance.
6. Adjust the kickstand accordingly for optimal screen positioning.
7. To turn off the projector, press the power button twice.

The projector supports various input sources for connecting your devices:

• Multimedia Connection: Connect via USB.
• HDMI Connection: Connect via HDMI cable.
• VGA Connection: Connect via VGA cable.

Available Input Sources:

• VGA
• HD 1
• HD 2
• AV
• USB
• SD

1. On your Android device, go to settings and turn on "WLAN".
2. Connect your Android device to the WiFi projector (projector-xxxxxx).
3. Enter the password: 12345678.
4. Turn on the wireless projection function in your phone's status bar or settings page, search for "projector-XXXX" and click to connect.
5. Click "projector-xxxxxx" on your Android device; screen mirroring will be successful in seconds.

1. Turn on WLAN (WIFI) and mobile data on your iPhone.
2. In your phone's settings, turn on wireless projection and search for "projector-xxxxxx".
3. Enter the password: 12345678.
4. Open Control Center, tap Screen Mirroring on your iOS device, and select "projector-xxxxxx" from the searching list.
5. Click "projector-xxxxxx" on your iOS device; screen mirroring will be successful in seconds.

1. Select source as "Multi-Screen" after power on.
2. Connect the projector and iPhone using the original USB data cable via the USB 5V input.
3. When prompted, get "Trust" from your iPhone by accepting the connection and entering your passcode if required.

1. Select source as "Multi-Screen" after power on.
2. Plug the original data micro-USB cable to connect. Turn on "multi-screen" in your Android device's settings directly.
3. Choose "projector-xxxxxx" and start mirroring.

Please connect to your home WiFi network to save your mobile traffic.

1. Turn on WLAN (WIFI) and mobile data on your phone.
2. Enter your phone's WLAN (WIFI) setting and search for "projector-xxxxxx".
3. Enter password: 12345678.
4. Open your phone browser and input IP "192.168.49.1", then enter WIFI AP to scan WIFI.
5. Click "Wifi AP".
6. Click "Scan".
7. Connect your home WIFI.
8. Turn on Screen Mirroring function.

Choose and connect "projector-xxxxxx" and Start Mirroring.

Adjust the image projected onto the screen:

1. If the projected picture is off the screen, please aim the lens of the projector at the center of the screen.
2. If the picture is distorted, as shown in Figure 2, please place the projector on a horizontal surface. As shown in Figure 3, use the remote control to adjust using the ±50 data ladder correction function.

Precaution: When the projector is suspended from the ceiling or in a rear projection system, please change the projection direction in the settings.

The diagrams show the process of adjusting the projected image for optimal alignment and distortion correction.

1. ±15° manual keystone correction: Adjust the ±15° image performance by using the manual keystone correction feature.

2. ±50° electronic keystone correction:

1. Press the menu button on the remote control.
2. Navigate to and select the "Keystone" function.
3. This allows for automatic keystone correction vertically and horizontally.

The settings displayed show options for H.Calibration, V.Calibration, Rotate, and Auto Adjust OFF.

The projector can be connected to various devices:

• 1. Laptop: Connect via HDMI, VGA, or USB.
• 2. Power Adapter/External Storage: Connect to power or external devices.
• 3. Smartphone/Tablet: Connect via USB or Wi-Fi mirroring.
• 4. DVD Player/TV Box: Connect via HDMI or AV.
• 5. USB Devices: Connect via USB for media playback.
• 6. SD Card: Insert SD card for media playback.
• 7. Audio Devices: Connect to speakers or headphones via Audio Out.
• 8. Headphones/Speakers: Connect for audio output.

PROJECTION DISTANCE & SIZE:

The following table shows the recommended projection distances and corresponding screen sizes:

For the best projection results, please select a throw distance higher than 2.6 meters.

Tips:

If you find black spots on the screen during use, please do not worry. Contact Simtab customer support for a video solution.

1. No Sound: Turn Dolby audio off in your device. An external speaker is required for VGA cable connection.
2. Blurry Image: Adjust the focus ring/keystone. Ensure the projector and screen/wall are at an effective distance.
3. Remote Unresponsive: Make sure the remote points directly at the IR receiver and is not obstructed.
4. Mobile Connection: For iOS, use a genuine lightning to HDMI cable. For Android, use a Micro USB to HDMI adapter or Type C to HDMI cable.
5. Up Side Down Images: Enter "Menu" on the projector or remote to flip the projection image.

If you have any questions about Simtab products, you can contact customer support any time!

• North America: support@jimtab.com
• United Kingdom: support.uk@jimtab.com
• Deutschland: support.de@jimtab.com
• France: support.fr@jimtab.com
• España: support.es@jimtab.com
• Italia: support.it@jimtab.com
• Japan: support.jp@jimtab.com
• Website: www.jimtab.com