Navien NPF Hydro-furnaces
The leader in condensing technology brings the next level of comfort to forced-air heating.
Introducing the NPF Upflow and Horizontal High-Efficiency Hydro-Furnace
The NPF furnace offers advanced comfort through its innovative hydronic heating design.
NPF700-060U3BH Upflow
NPF700-060H3BH Horizontal
Technology that Delivers Next-Level Comfort
Unlike conventional gas furnaces where the combustion heat exchanger is in the conditioned airstream, the NPF heats water by burning gas in a sealed combustion heat exchanger, completely isolated from the airstream. This heated water is then pumped through a hydronic heat exchanger that gently transfers heat into the air. This unique method provides:
- Improved operational control
- Safe and even heating
- Minimized operating sounds
- Less impact on conditioned air humidity levels due to lower air temperatures.
NPF Hydro-Furnace: A Closer Look
Conventional Furnace: Combustion heat exchanger is directly in the conditioned airstream, exposing air to high temperatures.
Navien NPF Hydro-Furnace: Our unique hydronic forced-air heating design keeps combustion in a separate, fully enclosed compartment for safe and quiet comfort.
The NPF features a durable stainless steel combustion heat exchanger located out of the airstream. A hydronic coil transfers heat from the water to the conditioned airstream at temperatures up to 150°F.
An Inside Look at the NPF Upflow
Our Stainless Steel Heat Exchanger and Burner
The heart of the NPF is its innovative stainless steel combustion heat exchanger, located out of the airstream. It heats water efficiently with 97% AFUE* and features ultra-low NOx compliance.
- Flame Rod and Ignitor: Easy access and reliable ignition.
- Industry-Leading Variable Capacity Operation: Operates from 100% down to 15% for optimal energy efficiency.
- Factory-Supplied NG/LP Conversions and High-Altitude Kits: Suitable for altitudes up to 10,100 ft.
- Manual Fill: Easy access.
- 2" Venting: Compatible with schedule 40 PVC, CPVC, and polypropylene venting, saving time and costs.
- Vent Installation Detector (VID): Added safety during installation and maintenance.
- EZ-Nav User-Friendly Backlit Interface: Provides easy access, built-in set-up, and diagnostic software.
- Cleanable External Condensate Trap: Convertible for left- or right-side installation.
- Optional Auto-Fill Water Connection: Features a 1/4-inch connection point.
*Annual Fuel Utilization Efficiency.
The Elements of Next-Level Comfort
Quieter Operation
The NPF is one of the quietest furnaces in the industry, achieved through isolated combustion (outside the airstream), variable capacity operation, and intelligent blower ramping. Sound pressure levels are significantly lower compared to common household appliances.
Sound Pressure Levels (dBA) Comparison:
- Lawn Tractor: 100 dBA
- Hair Dryer: 90 dBA
- Normal Conversation: 60 dBA
- Whisper: 30 dBA
- Breathing: 0 dBA
The NPF operates at significantly lower decibel levels, especially at minimum capacity.
Easier Operation
The intuitive EZ-Nav™ control panel puts control at your fingertips. Startup, configurations, and diagnostics are streamlined for easy operation. The NPF is compatible with single- or two-stage thermostats and integrates seamlessly with the latest thermostat and Indoor Air Quality (IAQ) technology.
Softer Heating
Our patented heat exchanger and hydronic coil gently heat the airstream, providing safe, even heating for a softer feel.
Greener Operation
The NPF is designed with the environment in mind, featuring high-efficiency ECM motor technology, 97% AFUE, and ultra-low NOx compliance. It qualifies for most regional incentives, lowers energy bills, and can potentially boost air conditioning and heat pump system efficiencies. Complies with SCAQMD Rule 1111.
Smarter Technology
The NPF's intelligent Variable Capacity System operates at 15%-100% capacity, optimizing air temperatures and airflow for maximum comfort and energy efficiency. It showcases adaptable technology integration and advanced control options, operating with standard or smart 1- or 2-stage thermostats. Self-diagnostic readouts facilitate easy system monitoring and maintenance.
NPF Variable Capacity Control System: Advanced Comfort for All Seasons
- Summer: When paired with an AC or HP system, the variable capacity blower can be customized for a comfortable, quiet cooling experience.
- Fall: As heating season begins and outside temperatures drop, variable capacity allows the NPF to operate at a minimum range to comfortably heat the home.
- Winter: As the temperature keeps dropping, the NPF compensates for greater heat loss with increased output.
- Spring: Even during cold, rainy days, the NPF's industry-leading variable capacity will automatically adjust to keep the space warm and comfortable.
Heating Capacity and Efficiency
Items | NPF700-060U3BH / NPF700-060H3BH | NPF700-080U3BH / NPF700-080H3BH | NPF700-100U5CH / NPF700-100H5CH | |
Heating (gas input) natural/ propane gas (BTU/h) | Max heat | 60,000 | 80,000 | 100,000 |
Min heat | 9,000 | 11,000 | 14,000 | |
AFUE (%) | 97 | 97 | 97 | |
Certified temperature rise range °F (°C) | Max heat | 45-75 (25-42) | ||
Min heat | 5-35 (3-19) | 10-40 (6-22) | 10-40 (6-22) | |
Burner control | Modulating |
Airflow Capacity and Blower Data
Items | NPF700-060U3BH / NPF700-080U3BH / NPF700-100U5CH / NPF700-060H3BH / NPF700-080H3BH / NPF700-100H5CH | |||
Certified external static pressure | Heating | Certified external static pressure 0.1" to 1.0" WC | ||
Cooling | ||||
Airflow delivery range [CFM] (Rated ESP) | Max heat | 720-1,200 | 950-1,400 | 1,200-2,000 |
Min heat | 350-1,200 | 450-1,400 | 400-2,000 | |
Cooling | 1,200 | 1,200 | 2,000 | |
Nominal cooling capacity (TON) | @400CFM | 1.5-3.0 | 1.5-3.0 | 2.0-5.0 |
@350CFM | 1.5-3.5 | 1.5-3.5 | 2.0-5.5 | |
Circulator blower | DxW | 12" x 10" | 12" x 10" | 12" x 12" |
Horsepower | 1/2 | 1/2 | 1 | |
Motor full load amps | 7.6 | 7.6 | 11.0 | |
Motor speed & type | Variable, Electronically Commutated Motor (ECM) |
Accessories
- Residential Neutralizer (V2): GXXX002212
- Residential Replacement Media: GXXX001323
- Return Air Box Kit: NPF700-060U3BH & NPF700-080U3BH GXXX002427; NPF700-100U5CH GXXX002398
- Outdoor Sensor & Wire: 30012950A
Dimensions
Dimensional drawings and measurements for NPF Upflow and Horizontal models are available.
Customer Support and Advanced Training
Navien provides extensive field support, webinars, and training events for builders, architects, and contractors. Their full-time customer support network offers quick answers to installation and operational questions.
Specifications
Items | NPF700-060U3BH | NPF700-080U3BH | NPF700-100U5CH | NPF700-060H3BH | NPF700-080H3BH | NPF700-100H5CH | |
Installation type | Upflow | Upflow | Upflow | Horizontal left | Horizontal left | Horizontal left | |
Venting type | Forced draft direct vent or non-direct vent | ||||||
Maximum vent length | 2" | 70 ft. | |||||
3" | 140 ft. | ||||||
Ignition | Electronic spark ignition | ||||||
Natural gas supply pressure (from source) | 3.5" to 10.5" WC | ||||||
Propane gas supply pressure (from source) | 8.0" to 13.0" WC | ||||||
Natural gas manifold pressure | -0.01" to -0.02" WC | ||||||
Propane gas manifold pressure | -0.01" to -0.02" WC | ||||||
Gas connection size | 1/2" NPT | ||||||
Water connection size | 1/4" NPT | ||||||
Condensate size | 3/4" NPT | ||||||
Materials | Casing | Corrosion resistant baked on pre-painted steel | |||||
Combustion heat exchanger | Stainless steel | ||||||
Hydronic heat exchanger | Copper & aluminum | ||||||
Venting | Exhaust | 2" or 3" PVC, CPVC, approved PP, 2" or 3" special gas vent type BH (Class III, A/B/C) 2" or 3" SS | |||||
Intake | 2" or 3" PVC, CPVC, PP, 2" or 3" special gas vent type BH (Class III, A/B/C) 2" or 3" SS | ||||||
Vent clearance | 0" to combustibles | ||||||
Safety devices | Flame rod, ignition operation detector, water temperature high limit switch, high limit sensor for exhaust temperature, Vent Installation Detector (VID), water level sensor, burner high limit sensor, Pressure Relief Valve (PRV), leak sensor | ||||||
Dimensions in (mm), WxDxH | 17.5 x 31 x 34.5 (445 x 787 x 876) | 17.5 x 31 x 34.5 (445 x 787 x 876) | 21 x 31 x 34.5 (533 x 787 x 876) | 34.5 x 31 x 17.5 (876 x 787 x 445) | 34.5 x 31 x 17.5 (876 x 787 x 445) | 34.5 x 31 x 21 (876 x 787 x 533) | |
Shipping weight lb (Kg) | 145.0 (65.8) | 145.0 (65.8) | 167.6 (76.0) | 145.0 (65.8) | 145.0 (65.8) | 167.6 (76.0) | |
Power supply | 120V AC, 60 Hz | ||||||
Max current (A) | 10.9 | 10.9 | 14.3 | 10.9 | 10.9 | 14.3 | |
Circuit breaker amps (A) | 15 | 15 | 20 | 15 | 15 | 20 | |
Wire size (AWG) | 14 | 14 | 12 | 14 | 14 | 12 |
Warranty Information
Registered Furnaces | Non-Registered Furnaces | |
Heat exchanger | Lifetime* | 20 Years** |
Parts | 10 Years* | 5 Years** |
Labor | 1 Year* | 1 Year** |
*Limited warranties to original owner in residential applications with prompt registration.
**20-years heat exchanger, 5-year parts, and 1-year labor for non-registered furnaces.
Visit navieninc.com for complete warranty details and restrictions.
We are @Navieninc everywhere.
Navien Inc. | Navieninc.com | 800-519-8794
20 Goodyear, Irvine, CA 92618
Navien Canada, Inc. | Navieninc.ca | 800-519-8794
555 Hanlan Rd., Unit 7, Vaughan, ON L4L 4R8