User Manual for Rayrun models including: HDC50-CB Multi-Stage Constant Current LED Driver, HDC50-CB, Multi-Stage Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver, Driver
HDC50-CB Multi-Stage Constant Current LED Driver-Rayrun
Fig.3 Fig.4 The on/off gradient speed can be adjusted on the setting page. Please pair the driver first and double click on the driver icon to open the setting page.
Programmable Constant Current LED Driver
HD30/50 HDC30/50 Series
Feature
Output current set from App 100% non-flicker DC dimming Current trim fine tuning Gradient speed adjustable Very low standby power Single color / CCT compatible Wide range LED type adaption Premium low brightness performance
Introduction
There are 30/50W single color / CCT constant current LED driver models in the HD/HDC driver series. They are Casambi ready and all features are fully software configurable with the advanced features of Casambi platform.
The output channel, rated current, gradient speed and trim level features are all adjustable from the Casambi app. These features allow customer to apply in various application with multiple options.
The advanced full DC dimming scheme is implemented, and it's 100% physically flicker free in whole dimming range. It also has very good low brightness performance, to build elegant low brightness environment and on/off dimming experience.
Models
Model Function Rated Max Power
HDC50CB CCT / Single
50W
HDC30CB CCT / Single
30W
HD50CB Single Color
50W
HD30CB Single Color
30W
HDC50/HD50 output spec. vs rated current:
Rated current 200mA 350mA 500mA
Max output Volt. 50V
50V
50V
Max output power 10W 17.5W 25W
700mA 50V 35W
1050mA 47.5V 50W
1400mA 35.5V 50W
HDC30/HD30 output spec. vs rated current:
Rated current 200mA 350mA 500mA
Max output Volt. 50V
50V
50V
Max output power 10W 17.5W 25W
700mA 43V 30W
1050mA 29V 30W
1400mA 22V 30W
Setting output current and channel
The working mode and output current is adjustable from Casambi App and the CCT model can also be set to single color mode. The rated current range is from 200mA to 1400mA with 6 options, and the factory default value is 350mA.
To set the current and working mode, please keep the driver unpaired and powered on. From the Casambi app, click on the driver icon and select 'Change profile' option on the pop up manual (Fig.1). The rated current and working mode can be selected in the list (Fig.2). Once the CCT model be configured as single color mode, the warm white channel will have no function and the cool white channel will be the active output.
Fig.1
Fig.2
Automatic LED adaption
The driver verifies the load character on each power on. It will run a load adaption process once the change of load is detected. During the adaption process, the lighting fixture will dim up and down for about 10 seconds. After this process, the driver will match the LED feature and maintain a 0-100% full range physical non-flickering DC dimming. Normally this adaption process happens on the power on moment once the lighting fixture is changed with the brightness of higher than 30%.
For CCT application, the voltage and current feature for each LED channel must be same for proper adaption and working. If two channel's voltage and current dose not match, the adaption will fail and the driver will only work in single color mode with limited function.
CAUTION: The adaption process CAN NOT detect the value of LED rated current, so the rated current MUST be set correctly before connecting the driver to lighting fixture. Otherwise the lighting fixture can be permanently damaged.
Advanced feature - Current trimming
To fine tune the LED driving current, please pair the driver first and double click on the driver icon to open the setting page. On the setting page please click on the 'Current trim' item in the PARAMETERS section (Fig.3). The output current can be trimmed from 100% to 50% of the rated current at 5% step (Fig.4).
Fig.3
Fig.4
Fig.5
Advanced feature - Gradient speed adjust
The on/off gradient speed can be adjusted on the setting page. Please pair the driver first and double click on the driver icon to open the setting page. On the setting page please click on the 'Gradient speed' item in the PARAMETERS section (Fig.3). The gradient speed can be adjusted in 6 levels from direct to very slow(Fig.5).
Advanced feature - Working at low brightness
To extend the application at low brightness, the output brightness is designed to rather lower at low brightness levels. The output brightness will be nonlinear to the relevant brightness level below a certain point. This point will be around 2% to 12%, related to rated current and trim value (Fig.6).
The driver will maintain linear DC driving mode at low brightness, no need to concern about PWM modulation issues.
LED brightness full DC dimming
Fig.6
0-100% 2%-12%
Set brightness level
Specification
Model Function Rated max power Input power Max input current Max power factor Typical Efficiency Output voltage Rated output current (mA) Output current trim Dimming method Standby power consumption Working temperature Case temperature Dimension Gross weight
HDC50CB CCT / Single
50W
0.28A
HDC30CB
HD50CB
CCT / Single Single Color
30W
50W
200-240V ac 50/60Hz
0.17A
0.28A
0.94
87.5%
0-50V DC
200, 350, 500, 700, 1050, 1400
100% to 50% with 5% step
Full range linear DC
<0.5W
-20~50°C Max 90°C 130x67x30mm 170 grams
HD30CB Single Color
30W
0.17A
HD30/50HDC30/50
App / LED
HD/HDC30W50W C a s a m b iA p p
CasambiApp L E D
DC
HDC50CB HDC30CB
/ /
50W
30W
HD50CB 50W
HD30CB 30W
HDC50/HD50:
200mA
50V
10W
350mA 50V
17.5W
500mA 50V 25W
700mA 1050mA 1400mA 50V 47.5V 35.5V 35W 50W 50W
HDC30/HD30:
200mA
50V
10W
350mA 50V
17.5W
500mA 50V 25W
700mA 1050mA 1400mA
43V
29V
22V
30W 30W 30W
CasambiApp 2 0 0 m A1 4 0 0 m A 6 3 5 0 m A
CasambiApp"" 12CCT
Fig.1
Fig.2
LED
LED 1 0 0 - 1 0 0 % D C
LED
LED
-
app " " "C u r r e n tt r i m"3 5%100%50%4
Fig.3
Fig.4
Fig.5
-
app "Fa d i n gs p e e d"3 ) 65
-
2%12%6
LED
DC
Fig.6
0-100% 2%-12%
(mA)
HDC50CB HDC30CB HD50CB
HD30CB
/ /
50W
30W
50W
30W
200-240V50/60Hz
0.28A
0.17A
0.28A
0.17A
0.94
87.5%
0-50V
200,350,500,700,1050,1400
100%50%5%
DC
<0.5W
-20~50°C
90°C
130x67x30mm
170
Corel PDF Engine Version 18.1.0.661 CorelDRAW X8