FSP Switching Power Supply CB Test Certificate
Reference Certificate Number: DK-136871-UL
Issued by: UL Solutions
Date of Issue: 2023-01-18
Product Details
Product: Switching Power Supply
Trademark / Brand: FSP
Model / Type Reference: FSPxxx-yyFCB, where 'xxx' can be 300 or 350, and 'yy' can be 27, 50, or 57. Specific models include: FSP300-50FCB, FSP300-57FCB, FSP300-27FCB, FSP350-50FCB, FSP350-57FCB, FSP350-27FCB.
Ratings and Principal Characteristics:
- AC INPUT: 100-240Vac, 6-3A, 60-50Hz
- DC OUTPUT: Refer to test report for specific details.
Applicant and Manufacturer Information
Applicant Name and Address: FSP GROUP INC., 22, JIANGUO E RD. TAOYUAN CITY 330, TAIWAN
Manufacturer Name and Address: FSP GROUP INC., 22, JIANGUO E RD. TAOYUAN CITY 330, TAIWAN
Factory Information: Multiple manufacturing locations are listed, including:
- Zhonghan Electronics (Shenzhen) Co., Ltd. (Various locations in Shenzhen, Guangdong, P.R. China)
- Wuxi SPI Technology Co., Ltd. (Wuxi city, Jiangsu, P.R. China)
- Wuxi ZhongHan Technology Co., Ltd. (Wuxi City, Jiangsu Province, P.R. China)
- ShenZhen HuiLi Electronics CO., LTD (Various locations in Shenzhen, Guangdong, P.R. China)
- FSP Technology Inc. Taoyuan Plant 3 (Taoyuan City, Taiwan)
- ZHONGHAN SCIENCE & TECH CO. LTD (ShenZhen City, Guangdong, P.R. China)
(Note: A comprehensive list of all factory addresses is available in the original document.)
Certification Standards and Test Report
This certificate confirms conformity with the following standards:
- CB 62368 3rd (as per page 1)
- Additionally evaluated to: EN IEC 62368-1:2020, EN IEC 62368-1:2020/A11:2020
- IEC 62368-1:2018
National Differences are specified in the CB Test Report.
Test Report Reference: 2022-0291-01-1-A0-C0, issued on 2023-01-11.
Additional Information
The document originates from FSP Group Inc., Taiwan, with certification managed by UL Solutions.
The original document includes a reference to the FSP Group Inc. (Taiwan) address: No. 22, Jianguo E. Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C).
The document also mentions that a sample of the product was tested and found to be in conformity.