Yocan Torch XL Portable E-Nail

Product Overview

Yocan Torch XL Portable E-Nail shown in multiple colors: black, white, blue, green, and pink.

Distributed by: Yocan USA
Website: YocanUSA.com
Email: service@YocanUSA.com
Phone: (605)400-3545

Manufactured by: Yocan Technology Co Ltd
Website: www.Yocan.com

Copyright © 2020 Yocan USA

Specifications

Technical drawing of the Yocan Torch XL device with overall height labeled 116mm and width labeled 48mm.

• Fits 14mm and 18mm glass waterpipe joints
• Now compatible with Evolve PLUS coils & Evolve Plus XL coil
• Operating temperature: 200°C-300°C (392°F-572°F)
• Approximately 45 puffs per charge with the Plus XL coil
• Approximately 90 puffs per charge with the Plus coil
• 2200mAh capacity battery
• Adjustable voltage: 3.2V, 3.7V, 4.2V (Indicated by White, Blue, Green lights respectively)
• Preheat function: 10 seconds
• Charging port: Type-C
• Charging time: 2 hours

Package Contents

Illustration showing the Yocan Torch XL E-Nail device, an Evolve Plus XL coil, a pick tool, a glass tube, and a Type-C cable.

• Yocan Torch XL E-Nail
• 1 Evolve Plus XL Coil
• 1 Pick Tool
• 1 Glass Tube
• 1 Type-C Cable
• 1 User Manual

Usage Instructions

Exploded view diagram of the Yocan Torch XL components, labeling: Power Button, Airflow Button (not for use with glass tube), Charging Port (Type-C), Battery (2200mAh), Metal Tube (or glass tube), Coil Cap, Evolve Plus XL Coil, Coil Base, Main Body, Male/Female Attachment.

1. Pull out the metal tube and screw off the coil cap.
2. With dab tool, put your desired concentrate oil onto the coil. (Do not stab the coils and do not overfill or 'flood' the coil).
3. Assemble the Yocan Torch XL portable dome-less e-nail.
4. Attach the Yocan Torch XL to your glass (fits 14mm & 18mm ground glass joints).
5. Power on the Yocan Torch XL portable dome-less e-nail with 5 quick clicks of the power button at the top of the battery. (White light will flash 5 times and the Yocan Torch XL is on standby).
6. Adjust voltage: Press the power button with 3 clicks.
   • White light indicates 3.2V
   • Blue light indicates 3.7V
   • Green light indicates 4.2V
7. Preheat: Press the power button with 2 clicks to start preheat. Blue and White lights blink for 10 seconds. To stop preheat, press the power button with another 2 clicks.
8. To start the device, press the power button with 1-click (light is on), inhale. To stop the device, press the power button with another 1-click (light is out). If you want a fully hit, press the airflow button and release it before you stop inhaling.
9. Enjoy your Yocan Torch XL.

Loading The Coil

Illustration depicting the process of unscrewing the top cap and loading concentrate directly onto the coil.

Unscrew top cap from the heating element, then carefully load directly onto coils. Be careful to not damage coils while loading.

Operating the Device

Illustrations showing 'Female Setup' and 'Male Setup' for attaching the Yocan Torch XL to water pipes.

To operate, fit onto your preferred water pipe. The water pipe adapter fits any 14/18mm female glass, and can also be inverted for use with male. Once loaded and fitted, simply press the button and enjoy!

Important Safety Information

• Failure to follow battery safety precautions can result in injury, electrocution, fire, death, and explosion.
• Store battery safely while charging. Do not charge unattended. Fires can result when charging lithium batteries.
• Do not keep in hot cars or store above room temperature of 74°F (23°C).
• Do not use damaged batteries. If battery casing is damaged, discontinue use and safely recycle battery.
• Do not use battery if contacts become exposed to solid or liquid matter. Shorts can result, causing fire or explosion of battery.
• Do not touch coils when hot. Severe burns can result.
• Do not touch hot material. Severe burns can result.
• Glass cap can shatter or explode if heated or cooled rapidly. Use of eye protection and face protection to avoid injury is advised.
• Not for use with nicotine or nicotine products. Not an ENDS device.

Addition Precautions

• If using your own battery, make sure it supports 0.3ohm device (not officially supported). WARNING: May cause damage, fire, explosion, or injury. Only professionals should attempt using an alternate battery.
• The heating element gets hot during use; be careful when handling.
• If the device gets too hot during use, please stop using for a while.
• Do not attempt to rapidly cool glass cover, as this can result in cracking or shattering of the glass top.
• When the voltage of the Yocan Torch XL battery is below 3.2V (red light flashes for 10 times), please charge your battery. The indicator light is red when the battery is low.
• Short-circuit: Red light flashes for 5 times.
• No atomizer or bad connection: White light flashes for 3 times.
• The charging time for Yocan Torch XL battery is about 2 hours with a 1A wall adapter; do not over charge it.

Warranty Information

A 90-day warranty is provided through YocanUSA. Warranty covers defects in manufacturing and defective batteries only and provides for replacement of those parts at the sole discretion of Yocan USA. Warranty does not cover any damage or injury that may result from use or mis-use of the device.

Warranty does not cover coil burn-out. Coil lifespan depends on usage and material used in the device. To maximize coil lifespan, use only clean material and do not overfill the coil. Use only at recommended output voltages and settings.

Replacement parts and coils are available at YocanUSA.com. For warranty service or replacement parts, go to YocanUSA.com or email service@YocanUSA.com. Submission of video showing defect may be required for warranty service.

Please keep the following handy when contacting us for warranty service:

• Original dated itemized receipt for purchase.
• Authenticity code (scratch off sticker on box).

IMPORTANT – RETAIN AUTHENTICITY CODE FROM BOX FOR WARRANTY SERVICE

Rights and Disclaimer

The Yocan Torch XL is provided as is without any guarantees or warranty except as stated above. In association with the product, Shenzen Yocan Technology Company, Yocan USA, and Dakota Import LLC make no warranties of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, of title, or of noninfringement of third party rights. No claims, representations, or warranties, whether expressed or implied, are made by both our companies as to the safety, reliability, durability, and performance of any of our companies' products. Furthermore, our company accepts no liability whatsoever for the safety, reliability, durability, and performance of any of our companies' products. Use of the product by a user is at the user's risk.

NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A SPECIFIC PURPOSE, THE PRODUCTS TO WHICH THE INFORMATION MENTIONS MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS, OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION MENTIONS. IN NO CASE SHALL THE INFORMATION BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.

The Yocan Torch XL and its packaging and documentation are the intellectual property of Shenzen Yocan Technology and Yocan USA. Unauthorized duplication of this device, packaging, or manual is prohibited. All rights reserved. Use of Yocan name and logo subject to trademark.