Yocan iCan eRig Instruction Manual
Caution
Keep the device away from any environment involving strong acids, alkaline, combustible materials, water, or any other liquids.
Do not keep in hot cars or store above the room temperature of 74°F (23°C).
Do not use damaged batteries. If the battery casing is damaged, discontinue use and safely recycle the battery.
Do not use the battery if contacts become exposed to solid or liquid matter.
Shorts can result in fire or an explosion of a battery.
Do not touch coils when hot. Severe burns can result.
Do not touch hot material. Severe burns can result.
If the device gets too hot in use, please stop using it for a while.
Not for use with nicotine or other nicotine salt products. Not an ENDS device.
Disclaimers
People under 21 years of age are not permitted to purchase or use this device. Non-smokers, children, and women breastfeeding should not use this product.
The device is not a medical device and is not intended to diagnose, cure, or prevent any diseases or other conditions.
The manufacturers and sellers will not be responsible for any consequential or incidental damage resulting from the sale or use of any merchandise.
Product Overview
Specification
Size: φ59*143.7mm
Coil Resistance: 0.4Ω (QBC)
Battery Capacity: 1100mAh
Voltage Levels: Low & High
Charging Type: 5V/1A Type-C
Charging Time: 1.5h
Package Content
- 1x iCan Device
- 1x QBC Coil
- 10x Cleaning Swabs
- 1x Type-C USB Cable
- 1x Instruction Manual
How To Use
- Pull out the water tank, fill water to the recommended water line, then put the water tank back on. Do not overfill.
- Pull out the atomizer tube, fill the concentrate into the QBC coil and then put the atomizer tube back on.
- Turn ON/OFF: Quickly tap the power button 5 times within 2 seconds.
- Adjustable voltage: Quickly tap the power button 3 times to adjust the voltage.
- Low: green light.
- High: red light.
- Working: On-demand mode & auto-mode.
- On-demand mode: Press and hold the power button; vibration alert after 8s heating then RGB lights on, total 35s heat up time.
- Auto-mode: 2 times click; vibration alert after 8s heating then RGB lights on, total 35s heat up time.
- Charging: Type-C port. Fast charging not supported. The red breathing light turns off once fully charged.
Protection
- High-temperature protection: When the device overheats, it will automatically enter into a 15-minute cooling sleep mode, during which it cannot be used. This smart feature ensures optimal performance and protection.
- Auto shutdown after 1.0 hour.
- Safety cut off: 35 seconds.
- No load: Green light flashes 3 times if the device hasn't connected coil.
- Short-circuit: Red light flashes 5 times if the device is shorted.
- Low battery: Red light flashes 10 times and stops working.
- Over charge protection.
- Lithium battery protection.