Parts List
Item | Qty | Description | Item | Qty | Description |
---|---|---|---|---|---|
A | 1 | Crossmember | E | 2 | M16 x 50 Bolts Nuts & S/P Washers |
B | 1 | L/H Side Arm | F | 2 | M12 x 110 Bolts & Nyloc Nuts |
C | 1 | R/H Side Arm | G | 7 | M12 x 40 Bolts 4 Nuts & 7 S/P Washers |
D | 2 | 22 x 67 Spacer Bushes | H | 1 | M10 x 40 Bolt & S/P Washer |
J | 1 | Captive Clamp Plate M10 | |||
K | 3 | 12 x 40 Flat Washers | |||
L | 1 | 10 x 30 Flat Washers | |||
M | 1 | Coupling Spacer | |||
N | 1 | Captive Clamp Plate M12 |
Fitting Instructions
- Lower spare wheel and unclip carrier.
- Using item F with item K loosely bolt item B and item C to the inside face of each chassis member. Locate item D into each existing hole on the outer face of each chassis member.
- Using item G with item K and item N bolt the left hand side arm (item B) to the existing forward hole in the bottom face of the forward crossmember.
- Locate item J through the rectangular hole in the bottom face of the right hand chassis and using item H with item L bolt item C into place at the forward hole.
- Using item G bolt item A to item B and item C.
- Using item E bolt the ball bracket and wiring plate (not supplied in this kit) to the mounting plate. Note: A coupling spacer is supplied if required.
- Fully tighten all nuts and bolts and ensure the towbar is rigid and secure.
- Replace spare wheel.
Diagram Description
The diagram provides a visual representation of the towbar assembly and its components. It details the main structural elements, including the central crossmember (labeled A), and the left-hand (B) and right-hand (C) side arms that attach to the vehicle chassis. Various fasteners, nuts, washers, and specialized plates are shown, identified by item codes (E, F, G, H, J, K, L, M, N), indicating their role in connecting the towbar parts to each other and to the vehicle. The illustration helps in understanding the correct placement and order of assembly for each part.
Notes
Note: nose load limits and vehicle manufacturers trailer / caravan weight limits must be observed.